6 cube 066

[Deets066]

ok so I've put a few pics of this saw out there.




Got a little run time with it today.

 

[paragonbuilder]

ok so I've put a few pics of this saw out there.

View attachment 89642


Got a little run time with it today.

And....?????

 

[Deets066]

And....?????

Well maybe I'll make ya wait, and start at the beginning

 

[Deets066]

 

[paragonbuilder]

Well maybe I'll make ya wait, and start at the beginning

Well as long as your sharing I'm good with that!!![emoji41]

 

[Deets066]

 

[Deets066]

Cuttin the head off the jug is the easiest part

 

[Lightning Performance]

Cuttin the head off the jug is the easiest part

Well said!

 

[Deets066]

Spinning the head and grooving for the Viton

 

[Deets066]

Few finishing touches

 

[Deets066]

Ok so let's talk about why to use a head.


It lets you freely decide as to where you want your ports. Most of the time I let my port locations dictate how much I want to machine my base and squish, along with how much compression I want.

With a head I can cut my base, if I so decide. To put my ports close to where I want them. Weather it's .030-.010- or none at all.

2 piece is also nice because you can dial the comp right in where you want

 

[Lightning Performance]

I want to walk the other road now. Time to fill the chamber and get on the pipe.
Nice work man.

 

[paragonbuilder]

Ok so let's talk about why to use a head.


It lets you freely decide as to where you want your ports. Most of the time I let my port locations dictate how much I want to machine my base and squish, along with how much compression I want.

With a head I can cut my base, if I so decide. To put my ports close to where I want them. Weather it's .030-.010- or none at all.

2 piece is also nice because you can dial the comp right in where you want

What jug did you use Keith?
And your choice of combustion chamber. Was there a reason?

 

[paragonbuilder]

Also what did you use to groove for the viton?

 

[jake wells]

nice saw keith i hope its a good runner for you.

 

[paragonbuilder]

I want to walk the other road now. Time to fill the chamber and get on the pipe.
Nice work man.

Hi Ken!
By fill the chamber, do you mean by use of a pipe? Or make it physically smaller?

 

[Deets066]

What jug did you use Keith?
And your choice of combustion chamber. Was there a reason?

Just a stihl branded 660 jug

Just winged it on the chamber, looked about right

 

[Deets066]

 

[Deets066]

Hi Ken!
By fill the chamber, do you mean by use of a pipe? Or make it physically smaller?

Would need to have less comp to run a pipe

 

[paragonbuilder]

Just a stihl branded 660 jug

Just winged it on the chamber, looked about right

Is a 660 already 6 cube? Just assumed you used a bigger jug with the name of your thread.