WANTED 394 and 395 Parts Needed - Updated

[AlfA01]

As the title says, I'm looking for a few things for a couple of builders that are in the planning stages...

I need a nice recoil (NOS 394 is even better), ignition, 395 intake block and hardware (screws mainly).

If anybody has a builder carcass lying around that they could part with, that'd be cool too.

 

[TUBBER 340]

Might have what you need are you looking for 394 intake or 95? And what hardware I’ve definitely got everything you’ll need just need some more specifics


Sent from my iPhone using Tapatalk

 

[AlfA01]

Might have what you need are you looking for 394 intake or 95? And what hardware I’ve definitely got everything you’ll need just need some more specifics


Sent from my iPhone using Tapatalk

Actually both intakes are needed. I have a 394 and a 395 cylinder. I'll send you a PM in a bit to discuss what you have.

 

[TUBBER 340]

Actually both intakes are needed. I have a 394 and a 395 cylinder. I'll send you a PM in a bit to discuss what you have.

Sounds good if I don’t reply it’s cause I’m sleeping just got off graveyard shift thx


Sent from my iPhone using Tapatalk

 

[ucm931]

As the title says, I'm looking for a few things for a couple of builders that are in the planning stages...

I need a nice recoil (NOS 394 is even better), ignition, intake and hardware (screws mainly).

If anybody has a builder carcass lying around that they could part with, that'd be cool too.

I guess this means you'll be on a 7-11 saw plan?

Embrace the CAD my friend.

 

[dustinwilt68]

Pretty sure I have what you need except the 395 intake, probably have most of it but not a carb

 

[AlfA01]

Still searching...

 

[AlfA01]

Looking for a 395 flywheel and coil, 395 cases, 394 crank, hardware, clutch and clutch drum.

 

[jacob j.]

Looking for a flywheels and coils, cases, crank, hardware, clutch and clutch drum.

Which crank and flywheel? 394 or 395?

 

[AlfA01]

Which crank and flywheel? 394 or 395?

Looking for a 394 crank JJ. I still have that 394 flywheel you sent me, so it will be going on the build.

 

[dustinwilt68]

Dan I have a crank, clutch, drum and a coil, coil will need a new wire.

 

[AlfA01]

Dan I have a crank, clutch, drum and a coil, coil will need a new wire.

Thanks Dustin. I'll PM you...again.