3 cube chain

[Moparmyway]

Awe that little bar looks cute on the stihly.

Hmnnnnn .................
Sounds eerily familiar ....................
I think I've heard that before ....................

 

[Stihlbro]

I didn't say "all of these guys". Just "some of these guys".

Ouch!

Awe that little bar looks cute on the stihly.

Wow! Really?

 

[Moparmyway]

Is this too much of a gap ?
It’s about 1/2”

 

[Redfin]

Wow! Really?

 

[Deets066]

Is this too much of a gap ?
It’s about 1/2”
View attachment 113624

I'd definitely tighten it up, plus your bout out of adjustment

 

[jakethesnake]

Is this too much of a gap ?
It’s about 1/2”
View attachment 113624

I’m thinking you’ll be ok. Race setup? Wouldn’t want that for everyday cutting. But for some quick cuts. You’ll be alright.

 

[Hedgerow]

Throw that 10 pin in the trash.

I've wrecked some good chains with a 10 pin...

 

[huskihl]

Throw that 10 pin in the trash.

I've wrecked some good chains with a 10 pin...

 

[Moparmyway]

I'd definitely tighten it up, plus your bout out of adjustment

Too far, gotcha !
11 tooth will tighten the gap and give me more adjustment !

I’m thinking you’ll be ok. Race setup? Wouldn’t want that for everyday cutting. But for some quick cuts. You’ll be alright.

It’s not for baking or grilling, but it’s definitely going to be helping me with some cleaning up !

Throw that 10 pin in the trash.

I've wrecked some good chains with a 10 pin...

So ........... 11 tooth and I’ll be just fine !
Thanks Matt !

 

[Lightning Performance]

View attachment 113570

Picked my bar and saws up today. Sure have a lot of chain work before Hedgiefest

Starter handles backwards. It will never run right.

Is this too much of a gap ?
It’s about 1/2”
View attachment 113624

Meh probably

 

[Hedgerow]

Too far, gotcha !
11 tooth will tighten the gap and give me more adjustment !



It’s not for baking or grilling, but it’s definitely going to be helping me with some cleaning up !



So ........... 11 tooth and I’ll be just fine !
Thanks Matt !

Cut the tail off the bar..
Note:
It's freaking hard steel.

 

[Hedgerow]

GWS Kevin's favorite cutting tool..

 

[Deets066]

Starter handles backwards. It will never run right.

It's kinda like Stallone in Over the Top, when I turn the handle around backwards it's like a switch that turns on.

 

[Deets066]

Cut the tail off the bar..
Note:
It's freaking hard steel.

I took the grinder with a flap disc to mine

 

[Lightning Performance]

View attachment 113642

I took the grinder with a flap disc to mine

You giving me a woody for a race saw. Just stop it

 

[Moparmyway]

Cut the tail off the bar..
Note:
It's freaking hard steel.

GWS Kevin's favorite cutting tool..

Ground on her already to get her where she’s at.

11 tooth settles her in real cozy like !

 

[Deets066]

You giving me a woody for a race saw. Just stop it

 

[Hedgerow]

 

[Hedgerow]

3 cube chain started.

 

[Hedgerow]

Loads saw well..
Cuts straight.
Good start.