200T kill switch PN# help

[angelo c]

Looking for help with 200t kill switch wire part #. My dealer can't locate the entire yellow/ green wire that's in the top handle to complete the "shut-off" switch. I see 3 separate #'s for the wire but not 1 part number for the entire wire with both ends already completed and ready to connect. was always able to order 1 part for complete wire before now he says can't find it.

part numbers 23-24 and 25 listed below. Used to come complete. Anybody know a PN ?

 

[angelo c]

yea can't get the file to attach or a pic to download from phone...so

 

[DND 9000]

Item 23 is market as (D) (not availible as separate item) You have to buy item 22 contact spring (1129 440 4000), that comes togheter with parts 23-25. Also part 24 and 25 is market as (C) no longer availible as individual parts. That means part 24 and 25 are only availible together as a set if you buy the contact spring.

 

[angelo c]

Item 23 is market as (D) (not availible as separate item) You have to buy item 22 contact spring (1129 440 4000), that comes togheter with parts 23-25. Also part 24 and 25 is market as (C) no longer availible as individual parts. That means part 24 and 25 are only availible together as a set if you buy the contact spring.

Thanks for the reply. So if I have this correct, I purchase "spring" 1129 440 4000 and I get the wire and plugs with the spring ? So the only change is I now have to purchase the spring to get the correct connecting wire with ends.
Again thank you...my parts guy is good....but better for mower parts then saw parts

 

[DND 9000]

Yes you are right. The contact sring comes with the ground wire (no part no.) and 2* terminal socket (part 24 and 25 on the drawing) These 2 parts have a part number, but with the marking (C) which means no longer availible as spare parts. Have a look on my file attached.

 

[DND 9000]

Some more information. This contact spring (and included parts) should be availible up to 2021.

 

[angelo c]

Yes you are right. The contact sring comes with the ground wire (no part no.) and 2* terminal socket (part 24 and 25 on the drawing) These 2 parts have a part number, but with the marking (C) which means no longer availible as spare parts. Have a look on my file attached.

Can't thank you enough...my IPL does not have that listed the same way. Older outdated mediacat version I guess.
Cheers.

 

[DND 9000]

Your welcome, no problem.