FOUND IT 066 or 660 Project

[Carhartt]

I some how have never had one of these yet and I am interested in building one from ground up. Im not looking for a shelf ornament. I want a working mule. Not opposed to a 661 either.

 

[mikerudder]

I have a couple carcasses and some boxes of parts I might be able to piece together a builder for you

How much are you looking to spend?

 

[Carhartt]

Just power supply end would be great. The hard to find parts. I can find plastic anywhere. A fair price. The cheaper the better of course.

 

[Cracker Boy]

I would as well id like an old short case 066

 

[Carhartt]

Finally got a 661 Stihl. Only took like 150 owned chainsaws till I got one. Anything bigger than 044/440/441 don't come my way often.

 

[Carhartt]

Im not sure how to change it to (found it). Could use a little help.

 

[Cracker Boy]

What you got a 661 project or a whole saw? I feel you on cc thing heck in my parts nothing much bigger then a 036 is all i find.even then your lucky its alk 170 180 190 025s 271 251 291s 290s clamshell junk,

 

[Carhartt]

What you got a 661 project or a whole saw? I feel you on cc thing heck in my parts nothing much bigger then a 036 is all i find.even then your lucky its alk 170 180 190 025s 271 251 291s 290s clamshell junk,

Complete saw. 150 PSI. Just needs a good cleaning. I have plasic torn down n soaking. Small crack in cylinder cover. Fairly new 28 in Stihl ES bar. Not sure how I feel about MTronic yet.
I have all those little Stihls you are talking about also. Some multiple of each. Soon time to clean off the shelves again.

 

[Cracker Boy]

I dont either they say its way to go.im bout to find out im outting together a 261c myself.what did you pay for it.

 

[Cracker Boy]

Im gonna get mine ported sev builders aaid port the mtron instead of carb model

 

[Carhartt]

I have a Husky 555 Autotune. It runs ok. I just have grown up turning screws and am always frustrated when I want to make a change and cant because there is no screw to turn. I don't own a ported saw and not all that interested. I guess I just never jumped on the bandwagon. Maybe if I learn to do it myself. I paid 500.00 for it. Ill take a pic and put it up later.

 

[Mastermind]

Changed title.....

 

[Carhartt]

Thanks Randy. Is that the only way to change title?

 

[Mastermind]

Thanks Randy. Is that the only way to change title?

You should be able to change it yourself. My user console is a bit different since I have a moderator view......so I'm not sure what options you will be seeing.

It there a button labeled "Thread Tools" near the top somewhere?