Search results

Guess I clicked the button too many times....

Anyone have a couple of 272 type brake covers. I'm building up a couple of those right now, and some fool gutted the brakes including handles. I'd love an old- style brake band for the 266, but I wouldn't let go of one if I had it, so probably going to go with the later style. I have a couple of...

I have all the stuff OEM already. Just wondering which filter setup is better.

Building up a 272 that's been under my bench for probably 10 years. I have a couple to rob parts from. What's the desired air filter setup? The K&N style or the one that fits in the little black box? Looks like the black "airbox" style might not clog up as fast. I'm not nearly as familiar with...

Off the bench & on to FB marketplace. Ugly duckling, but runs well.

It's a DCD780

You are talking to the guy who tows an RV with a VW. Yes, I march to the beat of a different drum. Have always liked the 441, as it's also different. Plus the "test bed" for M-Tronic.

I know this isn't the classified, but might get some interest here. Anyone need a nice Dewalt drill? I needed one for my box at the shop (run Dewalt there, M12 & Ridgid at home). I found a package deal on eBay, and will never use this drill. Bare tool. Will trade for other brushless tools in...

An Echo CS670 followed me home the other day. She has a scored piston. If I’m buying a top end anyway, is the 670 jug the only one in that family? Would an 8000 top end bolt on? I know very little about Echo.

TS400 with bad crank bearings. I don't enjoy cutoff saws, except for the part where there's no oil tank to deal with.

Anyone have an oil pump (or diaphragm) for an 011? Why am I messing with this junk? I don't know. Also need an air filter setup for a Poulan Pro 405 Plus. That should be fun to find. Lots 'o junk to trade.

4182 710 3201 is that lower shaft. You should grab a 4182 710 3203, which is the ENTIRE drive shaft end-to-end and lists for the same $38.57 as just the lower end by itself. Your dealer needs to go back to greeting folks at Wal-Mart.

Brand-new OEM carb?

Any chance the spring fell out of the impulse pump on the carb? The HT133 is a better machine in every possible respect anyway. I'd grab one if my HT75 wasn't so much lighter.

If you've had enough, I'll sort it out for ya. I have a dealership full of parts to work with and every factory tool. Send me the complete power head and throttle handle. PM for address. Results will be posted for all to learn.

Replace the cam gear. If you've been running it with the top cover off (like in your pic), it probably melted. I learned this the hard way on a newer FS130. Lasted about 3 minutes of tuning before the lobe melted on the cam. It would still idle, but reduced lift would not flow enough volume of...

Anyone need an imperfect 391 slug? I'm putting one back together that had a bad crank bearing. There are a couple of lines in the side of the piston, but it isn't too bad. I'm re-using the cylinder as-is. If you are rebuilding a scored one on the cheap, this is your ticket. It will likely run...

My shop is bursting at the seams. Most of them are non-runners. That said, there are at least 25 (good) runners there. Currently on the bench: bench #1 is an MS391 getting new crank bearings. Bench #2 is an 038 Super getting a wake up call from 10+ years of slumber in someone's barn. Bench #3...