Search results

I have an extremely clean Sachs Dolmar 133 Super here. This is likely one of those saws that was purchased to cut up a tree in somebody's yard and then never used again. It has sat on my shelf for 5 years, I wiped the dust off for pictures. Runs like it should $550 plus the ride/ fees

I hate to do this but I haven't been to a GTG in almost 3 years and I have my eye on a big financial goal. Scott (Treemonkey) built this for me to compete in the 45 and under and/ or 3 cube gas class. I wanted an ugly saw that nobody expected much out of, kinda like the ugly old G JD my grandpa...

I have a friend who has asked me to port a new cylinder for his MS250. While I hate working on these saws, I told him that I would port it if thats what he really wanted; he will put it back together. Here's where you guys come in, I dont know that I can do much to help performance without...

I bought this saw as a good running, ported 372 from a guy who used to be an active member on here. Ran a few tanks through it, let it collect dust for a few months and then posted it for sale. A few guys beat me up about trying to sell his work so I took the saw apart and checked everything...

This is one I never thought I would sell but I have an itch to buy another square body. Need to sell a few saws to free up a little more cash. Very nice Dolmar 6000i, has the old owners initials engraved in a couple spots, otherwise mint. Asking $325 plus shipping

I have a mint 5100 that I would like to sell. This saw probably doesnt have 5 tanks of fuel through it. Had a decomp installed by the dealer when it was new. If a guy wanted a non-decomp cylinder and slab sided piston instead, I have them (new in box). Would be willing to swap them out for a...

As the title states, I am looking for some well used .404 chain. Half tooth or juat a little less Must be full chisel, full comp, at least 50dl long. Anyone got some they want to get rid of?

Getting ready to move, going to be posting up several saws in the next few weeks. This is a very nice Husqvarna 390xp that was ported by Eric (ECSaws). It runs very well but I usually pick up my 562 when I need to cut. I have exactly one tank through it since I bought it; starts, idles, oils...

Anyone tinkered around with the 562 oil pump? If so, are there any improvements that can be made to increase oil flow to the tail of the bar? My @awol 562 pulls a 24 really well and the ES light helps with balance, but I am not getting enough oil. I have modified the pump on a couple of Dolmar...

Getting ready to move, going to be posting up several saws in the next few weeks. This is a Dolmar 7900 that was built by member @mdavlee. I bought this last year in the middle of an episode. Have run it one time since I bought it. Full wrap handle included for asking price, can sell it with a...

Getting ready to move, going to be posting up several saws in the next few weeks. This is a Husqvarna 372xp that was ported by a guy down in southern Missouri. I have put three tanks of fuel through it and can say that it starts, idles, oils and runs like it should. The only issue I have found...

Getting ready to move, going to be posting up several saws in the next few weeks. This is a Makita 6401 with a new Dolmar 7910 piston and cylinder, squish set at .020" with Felpro paper gasket. Two tanks of fuel through it; starts, idles, oils and runs like it should, actually a little stronger...

Like the title says, can you run a 10 pin 3/8" sprocket with a standard large mount bar? Or will the chain want to run off the rails? What about an 11? Pictures?

Came across a really nice 242 today. I had planned to resell it but may end up keeping it. What do you guys think, is it nice enough that I should put it on a shelf? Assuming it was manufactured in week 17 of 1989, anyone confirm?

Needing one fairly quickly, anyone have one they can send me?

I have a saw here that came to me with no gasket, squish measures .014" Need someone to send me an old base gasket from their xtorq saw so that I can use it for a template.

Like the title states, I have a fairly clean Makita 6401 that I would like to sell. Just installed a brand new OEM 7910 piston and cylinder kit. Had to modify the top cover to make it fit, will include the matte black cover as well. Trimmed the carb limiter and freshener up the fuel system...

Looking for a zama carb from a 357 or 359, on the Cheap. Anyone got one?

I have a nice Jonsered 2163 that I would like to sell. I wouldn't call this mint but it is very clean. I have installed a nice used 372xp cylinder along with a new Meteor piston, modded the muffler (reinstalled the screen), advanced the ignition, replaced the impulse line and retuned the saw. I...

Looking for a cylinder for a friend. Would like to find a D combustion chamber cylinder from an 046 but anything(OEM) will be better than the NWP big bore