Search results

i have tried a little dribble of gas down the spark plug hole ... it did not even cough. is there a way to check crank seals ... i do not have a pressure/vac pump

where do i begin looking ... rings are free ... piston looks good ... no scoring that i can see on cyl. wall ??? i do not have a pressure/vac gauge ... perhaps crankshaft seals?

hello guys, i've been reading and studying a lot on OPE and have learned truck loads of great info! here's my problem ... ics 613gc concrete chainsaw. it is a 80cc powerhead with a 14" diamond chain. it does not run. it does not cough. it does nothing! it was not running when it was dropped...

good evening gents, this is my first time posting in a long while and i have a few questions for you guys that sharpen harvester chain. i have a timber tuff cs-bwm grinder ... i have sharpened alot of regular saw chain and a lot of the 404 harvester chain with the thing. i have now gotten a...

thank you friend

would it be possible to get a copy of the rate manuals ... thanks if possible

thank you friend ... it'll be monday before i get back at it ... i can borrow a compression tester, so what pressure should i be looking for ?

have tried 3 total plugs ... strong spark outside of engine ... it must be sparking inside as the generator is backfiring through the carb and through the exhaust. when i pull any of the plugs ... they all come out soaking wet with fuel it is possible there could be something wrong in the...

first post here guys so bare with me a bit. i have a hyundai generator ... model # hhd 7520. it is getting plenty of fuel to the carb ... i pull the plug and it is soaked with fuel. it has spark to the plug ... i have visual confirmation of good strong spark. it has good compression and the...