Search results

Hi folks. Been a while…. Hope all are well. I’m building myself a Husky 570 X-torq auto tune saw that I was given after it got strait fuelled. I was just sitting here looking at these crank stuffers and thinking how they would stop a lot of the pulse driving the lowers as the crank lobes go...

Hi Folks. for reasons I'm not going to go into, I stopped posting on here for a while but I'm free of those shackles (and people) now so will start putting up some build posts for a bit of fun. I have a really nice and vary interesting late flat top 066 transition saw on the bench at the moment...

Hi folks. Im building another 44/46 hybrid and my donor saw is a 10mm.... bugger! I need a 12mm crank. Happy to pay postage to Australia Cheers Tony

deleted

Link: https://www.youtube.com/channel/UCJoTtL-7SPri-NX1zpH245w?view_as=subscriber I live in Australia (Straya) and use my channel to post up my chainsaw adventures at local gtg's, saws I build, racing etc etc. Yes you will see dust come from my chains at times but let me assure you they are...

I bought one of those Huztl 070 kits. Replaced the top end with an after market cylinder, ported it, Hyway piston and rings, OEM wrist pin bearing, replaced the 070 clutch with a complete OEM 6 shoe 090 setup and a rim sprocket drum wearing an 8 tooth 404 drive. It went great but the vibration...

She be my favorite model saw ever This one was a junk saw, done LOTS of work, every second thread stripped, etc etc. I used a Lilredbarn 52mm top end, filled the lower transfers as they were much bigger than I wanted, Bing carb running a .82mm main jet ported to 99/122/80 with big deep fingers...

Hi folks I am interested to hear from some of the folks on here building race saws on their findings or opinions on outright cut speed potential of a 288, 064 and 066. I have built a couple 066’s that are very quick, the one running the 288 piston is proving hard to beat in its local racing...

Hi Folks. I now have 2 x 1122 064/066 cases here with a stripped bar stud hole. The 066 belongs to a friend and has had a helicoil installed by a dealer. The stud refuses to stay tight and keeps winding out. The 064 is a busted old saw I bought to fix up and make a fun/race saw. I am...

Frank is a pile of junk! Frank is built from the rubbish and broken parts leftover from several 044 and 046 builds. Cases are damaged but usable, half 10mm, half 12mm. Tank handle has cracks, holes drilled in it, but houses a WJ carb :) Covers are miss matched faulty leftovers not good enough...

I was sent a newly developed MS660 piston from Hyway for testing. I was honored as they said it was the only test piston sent to Australia. Today I got out to compare it with an out of the box stock Hyway piston, I had a little oil pump trouble on the 2nd run but you get that with a china saw...

Hi Folks. Firstly, I'm after a bar about 18 to 22" to fit on my 084 that I can run 3/8 .050 chain on for some informal fun/racing with mates. I cant find much in the way of 50 guage short bars to fit the large stihl mount and was wondering if anyone can help me out with a possible candidate...

Hi folks. Just wondering if anyone has and suggestions on how to fix this little issue I have. It's HT7 off an 084 and I don't want to damage it What are my options for repairing the fuel barb. Carb on the left is the problem.

Hi Folks. Firstly I would like to thank HL Supply for replacing the MMWS cylinder kit that hung a ring on its first go. The replacement is a fine looking item, as was the original and I will be sanding the bevel on the exhaust floor this time before fitting it. In the past, when ever I have...

I tell ya folks, its a dangerous place this country! Every time I cut wood, its not mice jumping out the log, its spiders the size of my hand in numbers, large venomous centipedes, scorpions, most of the top 10 venomous snakes in the world, 1.5" long bull ants that chase you down once you upset...

Hi Folks. I noticed one of the boys doing the Chinese 660 clone saws had an issue with a hung ring on one of these top end kits. I have had one here for a little while now and put it on a saw I rebuilt for a friend. It started fine at first, let it warm up, tuned the idle and rough adjusted the...

Hi folks I bought one of these Chinese saw kits to do and plan to put it together 100% stock and test it, then do some surgery and see how it goes. Does anyone have any good 361 numbers that work? The farmertec cylinder measures 104/p-125/s-125/70 with the gasket and .045 squish Having a lip...

Hi Folks. I have a friend that needs a new piston for a 2077 The 2077 piston has a compression height of 22.5mm and overall height of 42.5mm He has been told an 046/460 piston will work and when I dug the Meteor 046 piston I have here out, its compression height measures at 21.5mm but the...

I'm all excited. Tomorrow I head off to a GTG with fellow chainsaw nuts. Will only be a dozen or so of us but there will be plenty of serious saw action. And... this is the best bit... I get to cut pine for the first time ever. We have timber on the ground, trees to fell and destroy, god...

Hey folks I have a couple aftermarket cylinders here that I would like to do some work on but am unable to cut the squish band as it's plated. I don't have a lathe and usually cut the band using an old piston with a piece of power hacksaw blade tapped into a slot in the top of the piston. This...