Search results

A friend lent me a MARS TV BOX to try. This thing gets a ton of channels but some of them buffer or crash. The cost of the MARS box is $300 (ouch). I see there are IPTV subscriptions advertised with monthly payments. Anyone have any knowledge of the IPTV subscriptions??

I live in an old house with a stone foundation with a dirt floor cellar. I am looking for some kind of insulation to put in my cellar windows to prevent the cold winter air from coming in. I have stuffed fiberglass batts in the openings in the past but that is some nasty stuff to use. The one...

Non ethanol gas became available in my area several years ago & I have been using it ever since. I have also also added Stabil to the gas when I buy it. I use it in all of my equipment & I was wondering how long this gas will keep before starting to deteriorate? I have several old walk behind...

The ram on my Boss 7 ton splitter broke & when it did it bent the hyd. shaft. I did get the shaft straightened but the return spring put two raised spots on the cylinder that the hyd. shaft goes thru to pull the ram. I was wondering if the piston will let fluid go past it and lose pressure. The...

I have a friend with a JD X300 that the control module failed. His mechanic told him it could have been caused by a battery maintainer or jump starting with another battery? Is that possible? Evidently this is a problem with some of the JD models

Looking for MS 181C & MS290 service & IPL manuals. Thanks

Looking for a MS250 Service & IPL manuals. Thanks!

Looking for a FS46 trimmer Service & IPL manual. Thanks

Model # 316711200. This has a Walbro carb WT 1029. I cannot find any info on it. It will run for a short period & then just shut off like it ran out of gas. I ran it without the fuel filter & it did the same thing. There is a connector mounted on the side of the carb with two wires going to it...

Looking for a service manual & IPL for a FS76 trimmer. Thanks

Looking to get a new oil lubed air compressor for light duty use. Don't want to break the bank & have looked at this one from Harbor Freight, (McGraw 20 Gallon 1.6 HP 135 PSI Oil Lube Vertical Air Compressor) I know it is Harbor Freight & some of there tools are not the most reliable. Has...

I am looking for an MS 311 IPL Thanks

Looking for a 1133 400 1350 coil. Are there any after market brands worth buying? The guy that owns this saw dosen't want to put a ton of money in it as it has other issues that need fixed.

Ms270 flywheel has a broken fin. Would this cause it to knock out coils?

Does anyone know the part # for a MS270 flywheel puller?

Looking for a service manual for a MS270. Thanks

I have a Stihl mesh safety shield with ear muffs that I use when weed wacking. The glare from the shield when in the sun makes it impossible to see. Is there anything I could put on the shield to stop this? Or is there any mesh screens that would not have the glare. I have tried the plastic...

This has a carb that all I find identification is RUI ING stamped in it. Anyone know what it is. Does the primer bulb hose go down to the bottom of the tank? Also what is the inlet needle valve setting? It will start but will not take the throttle. I don't know what kit it will take nor the high...

I lost spark on this saw. Removed the coil & cleaned the contacts. They ere not really dirty. However the flywheel has the "lining" tore up. See pic attached. I put it back together & it fired up. I did remove some of the loose "lining". Could that have caused the lack of spark?

I found an old Jacobsen model # j-100-v. Does anyone have any info on this? It is not getting spark. I do not know how to remove the starter pulley to get at the flywheel.