Search results

I completely went through this saw a couple months ago. Has approximately 15-20 tanks of fuel on it since the rebuild. It has an oem dual port muffler that I opened up a little. I also did an ignition advance. 1309 coil D chamber jug. The jug had some transfer I cleaned off. It has a...

As the title says. Let me know. Thanks

As the title says. Let me know if you have a good used cylinder you’d like to parts with.

@Stump Shot built and ported this saw for me about 3 years ago. He did a full rebuild on it with new bearings and everything. He also painted the cases and the clutch cover. The saw is sporting a HLsupply 272 HD air filter and has a meteor piston. I’ve only used the saw a small handful of...

Like the title says. I’m in need of a good 3120 crank shaft.

Here’s the victim. A well taken care of and clean saw.

Been quite a while since I did thread. I figured it was time for one. Here’s the victim. A bone stock, 1 year old MS880 This saw belongs to a local fella that uses it in his firewood/tree work arsenal. The biggest bar he uses on it is a 36” .404.

Looking for a couple of 046 or MS460 cylinders for hybrid builds. Let me know what cha gots. Cheers:beer-toast1:

Hey guys, I’m looking for a few stihl 056 odds and ends. Dual spikes Air filter cover knob Handle bar AV buffer (I think the PN is 1113-790-9920) Maybe even a full wrap handle bar. Cheers

The good doctor ported this saw for me several years ago. I recently found that the piston was scratched up from some sort of debri. Upon a close inspection I found the clutch side crank bearing had started to fail. I rebuilt the saw with new crank bearings etc. I did a quick build thread to...

Some back story for you guys. I decided I needed to sell a couple saws to help make room for more. After some deep thought I finally decided that it was time to let my beloved MOFO 036 go to a new home. Down off the shelf it came for a clean up and going over before I listed it. This is when...

In the raffle held for Shemane Witmer @bigbadbob picked the port job I offered. Bob sent me a real nice MS461 to port.

Got this saw for a good buddy of mine. It had taken a whack from a tree and appeared to have lots of hours on it so a full rebuild was in order plus since I can’t leave anything stock it also received a port job. I didn’t think to take any before pictures. New crank bearings and gasket set FW...

Looking for a good oem crank. May also consider a busted up and beat down saw carcass for parts as long as it has a good crankshaft. Have $ or parts for trade. Shipping will be within the US if that makes it easier.

Here we go fellas. Courtesty of @Glock37 we have newly powdered cases, recoil housing, muffler and 3/4 wrap. Mike does excellent powder work. If anyone ever needs parts powdercoated Mike is the guy you need to talk to. I modified the muffler prior to sending it for powder. I'll show...

Doing some shop clean out. I have a decent set of 046 cases and a good clutch side 046/460 case half. All screw holes appear to be in good condition. The bottom spike mounting hole in the one clutch side case has a screw broke off part way down. No other issues that I've found. I also have 2...

A few weeks back I was contacted by fello OPE member @CJ Brown. He had a freshly rebuild husky 272xp and wanted it ported. Arrangements were made and he delivered the saw to me along with a few brand new extra parts.

Just wanted to send a big ole happy b-day and GFY to OPEs favorite slacker, Dall. Happy birthday bud. :dev14::ura:

Like the title says, I'm in need of a good 044 fuel tank. Thanks guys

looking for a new to lightly used bar to fit 3003 Stihl mount. (024-066) I need a 16" 3/8 .050 bar