Search results

I'm selling this set because I need the money elsewhere now and a NOS part this whole project hinged on fell through. I would like to get $500 for the lot. Cases Fuel tank X2 old style fuel caps Piston Top cover Filter base Filter cover Sent from my E6810 using Tapatalk

Here is a 066* Mr Randy did for me. The saw had low hours on a rebuild when I got it, I haven't run many tanks through it since I got it back from him. It is a hard running saw for sure, it has a KS cylinder that the shop put on when it was repaired before I got it.* Clutch cover is aftermarket...

Wanting a builder saw, I have a good used 7900 top end, just need a good set of cases and crank. I want to build one and port it for an event to be given away. It would help though if it had all of the covers as well.

I have this saw I got burnt on, you win some you loose some, just trying to get some money back out of it. Overall the saw is in decent shape, shows pretty heavy use but look to be solid overall, it just has the bum top end. It is missing a few fasteners but all the important bits are there...

Here is a pretty good looking 480 Super, only been run one or twice since I got it, one reason I'm letting it go. I did manage to find the proper filter set up for the cover that is on it. Filter is in pretty good shape and the cover has some cracks like most, I tried repairing them the best I...

Here is a good looking 480 Super. Runs like a top, has normal wear, a decent filter cover and decent filter. I'd like to get 225 shipped. Sent from my E6810 using Tapatalk

I decided to sell this because it's done more sitting than anything in the past year, I have a MMWS 660 that I grab if I need a saw that can run a 32"+ bar and this saw is almost under bar'd at 28" It has a ton of compression I'm pretty sure it's a pretty good bit over 200, reminds me of a 2094...

I am posting this here to try and drum up competitors for our chainsaw competitions. The competitions this year are April 27th, so a little over a month away. The classes are: Stock Appearing 3 Cubic Inch or Under Stock Appearing 4 Cubic Inch or Under Stock Appearing 5 Cubic Inch or Under...

I am having a 2171 ported and the builder found some bluing on the crank so we decided not to re use it. So I am looking for a good used crank or a new one. Sent from my E6810 using Tapatalk

Here is a 2101xp that I was supposed to finish for the same guy, but he told me to see if I could sell it as is. It's missing a few things as shown in the photos, has a good top end, mondo compression. The carb is there but it's missing the throttle rod, carb screws, filter base and filter, and...

My buddy has this for sale, it's complete, has meteor top end, he wanted me to test it and I noticed a metallic sound at idle and at WOT not under load, he told me to just sell it because he wants the money for a cruise later this year, he wants $500 plus shipping, saw runs and cuts good other...

Like it says in the title, looking for Jonsered 2094/95 saw and/or parts, if you have anything please shoot me a PM.

Im looking for a set of good used cases, I will be having them re powder coated for a project.

I'm looking for at least a good used Cylinder for my 925 project, 52.4 mm Sent from my E6810 using Tapatalk

I have decided to sell this project 805 I have, Cosmetically the saw looks pretty good, it got a scored piston early on in its life I guess. I know that some of the vibe mounts need to be replaced as well as probably some fasteners. I dont have much experience with the value of the Macs not...

So I am rebuilding a 2171 from a busted up saw I got relatively cheap from ebay, the plan is to put the 75cc top end on it and then I plan to have it ported afterwards. I dont have a whole lot of experience gauging wear on a crank, so I was thinking I might just buy one that is good from...

So I had these saws and rebuilt them, I put a NOS piston in the 288 and a Meteor in the 181, after the break in period (3-4 tanks) I check the pistons, after running them rich I add, and they showed signs of starting to score, so maybe I just didn't clean up the cylinder well enough or there was...

Hello everyone, I broke a chain over the weekend and I need a new drive Link, present tie strap and another tie strap so I can put it back together again before Saturday which is when I'm going to cut again. Sent from my E6810 using Tapatalk

I am trying to help my buddy get set up with a saw that will have no problem meeting any of his needs when he gets his saw mill. We have settled on a 70cc saw so he has plenty of power to run a 28" b/c and bump up to a 32" b/c if he really needs too. The saw needs to run flawlessly, It doesnt...

Red - Pending payment/Sold Blue - Pending (Someone asked for shipping but hasn't committed) I have a few chainsaws I would like to get rid of. I have my eye on a saw I would like to purchase so I am trying to liquidate some of my collection I don't use anymore. All of the prices listed below do...