Search results

I have project saws for sale. All prices do not include shipping 2. Pioneer farmlite, I was in the process of rebuilding the carburetor and replacing the fuel lines when I discovered corrosion in the tank and I didn’t go any further. Has good compression and if my remember correctly spark (I...

I’m trying to mow a few yards on the side, about 3 yards a week is my goal. I started out using push mowers, then I bought a used 36” walk behind (hours unknown) and then a used 32” walk behind. Then a 48” Ferris zero turn but it’s too big for my trailer and too big for a lot of gates around...

I was wanting a 42” zero turn so I could haul it on my 4x8 trailer. Someone had a Yazoo Kees zero turn for $950. I offered $650 and he countered with $700. I went to get it and he had to jump across the solenoid to start it. I bought it anyway, and it turns out the ground wire was disconnected...

Good running saw. Great compression. Saw is a 2013 model. Oiler works. Run strong for its size. I installed a new Tillotson carburetor, and a new air filter. $150 plus shipping Sent from my iPhone using Tapatalk

Good running saw. Starts easily and Oiler works. Has a 14” rollomatic light bar. New oem seals, gaskets, fuel line, fuel filter, av mounts. New aftermarket clutch cover, air filter, air filter cover, meteor piston. Saw runs well. Fully adjustable Zama carburetor with no limiters. $350 plus...

Both saws run good. 20” bar and chain on both. PM605 has a chip in the air filter cover and some paint loss on the oil tank. PM610 the tab on the throttle lock is broke, but the throttle lock does this work, it’s just harder to get pulled up without the tab for your finger. Gas cap need a new...

Good running saw. I rebuilt this saw, new oem bearings, seal, fuel line, fuel filter, meteor piston, aftermarket muffler and clutch cover, new raisman bar, new Husqvarna chain, new oem air filter. Saw runs and cuts good. L adjustment screw is bent a little but still does the job. Runs and cuts...

Good running saw. I rebuilt this saw, new bearings, new seals, new gaskets, rebuilt carburetor, new piston rings, new bar and chain. I ran a couple tanks through it and it runs good. Might could use a carburetor adjustment but it runs and cuts good. $150 plus shipping. Sent from my iPhone...

I put a meteor piston and new oem crank seals. The old piston was not scored and was in good shape but a dished piston, thus the need to be replaced. Saw has great compression and runs but it smokes terribly and a black oily residue is come from the muffler. Either it needs a case gasket or a...

Stihl 009, complete saw. 120 psi compression and spark looks strong. Someone else replaced the fuel lines. I got it to pop on some fuel in the carburetor but not run. Good saw to fix up or use for parts. $50 Plus shipping. Sent from my iPhone using Tapatalk

Nice low hour saw. Starts right up and runs good. I put a new fuel line on it. Has a crack in the foot pad. A few scratches and scuffs on the clutch cover. 16” bar and chain. Sent from my iPhone using Tapatalk

Saw has 150 psi compression and good spark. I replaced the fuel line and fuel filter. I replaced the impulse hose as well. I used oem parts. I cleaned the carburetor but never could get it to run. Needs a new carburetor or more carburetor work. One A/V mount appears to pulled out, causing the...

I have two good running Stihl 044 chainsaws for sale. Saws are sold PHO and are $400 each plus shipping. Both have been rebuilt by me. Saw with black covers is completely oem except for the air filter. Saw has about 8 tanks on it. Has new bearings, seals, gaskets, piston, rod bearing, fuel...

Saw is mostly complete. Has some compression but I’d say it’s low, probably 100-125 psi I’d guess. Air filter cover is cracked. I haven’t checked it out much but I can upon request. I would assume a total rebuild. $100 plus shipping. Sorry, I haven’t cleaned it up, just got it today. Sent...

Saw has a scored piston and cylinder, does turn over . The parts that are on it look pretty good. Case is not broken anywhere and gas tank looks good. Top cover and gas tank are engraved with a number. $50 plus shipping Sent from my iPhone using Tapatalk

I just bought a Honda HRS21 push mower. It is probably from the 1980s, it has an aluminum deck. The spark plug boot, coil cover and air filter cover are missing. I clamped a spark plug to the exposed wires of the plug wire and I didn’t see any spark. The blade safety brake is working as it...

I have a Stihl HS74 that needs a carburetor. I am fine with buying an aftermarket carburetor for it. All of the carburetors I see say they fit a HS74 and a HS75 which is the same carburetor as a FS75. I’m not sure exactly of this fitment nor do I trust it. So is this the same carburetor? Anyone...

Saw has new oem crank seals, impulse hose and fuel line. Has new nachi bearings and new caber rings. Walbro WT-215 carburetor. Engine housing is aftermarket, but the fuel and oil caps are oem. The engine housing was replaced because the original one was cracked. Bar is Stihl and chain is Oregon...

Stihl 046 chainsaw number 1 I completely rebuilt this saw. Nachi flywheel side bearing New oem clutch side bearing New caber piston rings New oem seals New oem gaskets New HD2 filter (1 tank ran through it so far) New oem fuel line New oem impulse hose New oem air filter cover New...

Saw #1 150 psi compression and spark. Saw #2 150 psi compression and spark. Gas tank has a hole, but a spare is included. Saw #3 150 psi compression and good spark. Saw #4 140 psi compression and good spark. Pictures coming tomorrow on it. $75 each plus shipping PHO. Sent from my...