Does that mean you have to be special to order them?
I'd agree w PMP Tom...
I brought home a large trash bag full. :clap2: Had to put it in the back seat, bed was full.
Did I mention it was heavy and dense?
Check the 2nd cut. I'd like to see the big cc's dogged in... let um eat! Lean on the fat torque.
I’m glad it’s over. That was a ton of work.
Last load. I packed it in there pretty good. Had to be 2k. I had 90 in the bags and she still sagged.
No biggie. I’m running out of room in my “staging” area. One more stop after work today and I’m throwing in the towel.
My trailer is rated 1750 and it’s 8’. Just need to get them on it...
Mill for multiple cant!!
Definitely not today. It's on a mountain side and the angle is pretty steep so this rain wood make it too slippery. I might go back once more. I'm...
6’ pry bar^^^^
3 nights in a row now. I’m beat.
Did a stupid thing and took a few swipes off the rakers w/out a guide. Never do that again...
114yr old oak. 42” ain’t big enough.
Vid of an xcut uploading. I did 98% of the noodling with the HackedUp 365sp w a 20”. Fooker screams down through the wood with an 8.
2 more rounds. Pulled up and noticed someone else took some of this log. I’ll try again tomorrow and see if anything is left.
Good gawd!! Seems you could take about 1/8-1/4” off the rakers.
I’d love to know the hp on one of those.
You end up with a very smooth finish. Like mentioned, no cutters wandering out real far, potentially slowing down the cut (talkin race chain here...
Separate names with a comma.