birdmeter
Pinnacle OPE Member
- Local time
- 5:09 PM
- User ID
- 4503
- Joined
- Nov 2, 2017
- Messages
- 656
- Reaction score
- 2,271
- Location
- tulsa okla
*s-word what a bummer.
Thoughts?
- Thread starter afleetcommand
- Start date
*s-word what a bummer.
Marshy
WFO Cutting
- Local time
- 6:09 PM
- User ID
- 417
- Joined
- Jan 5, 2016
- Messages
- 3,800
- Reaction score
- 13,098
- Location
- Mexico NY
Me: Just cerious. Are you a Husqvarna dealer? Also. Can you tell me more about what was done for porting?
Him: I’m not a dealer and you open up the transfer ports and do some work on the muffler to make it cut faster
Me: I'm familiar enough with the concepts, was wondering specifics like if you machine the base or combustion chamber any or change intake/exhaust timing at all...
Him: No I don’t do timing or machine the cylinder All I do with the intake/exhaust is take the burrs off
Me: So no adjustments to the intake or exhaust, just transfers and remove flashing, open muffler?
Him: Yeah
Me: Would that void the warranty? I guess it wouldn't matter because it's a used saw. The warranty only applies to the original purchaser...
Him: Not at my dealer and I figured I would sell it locally and my dealer would honor it
Him: I’m not a dealer and you open up the transfer ports and do some work on the muffler to make it cut faster
Me: I'm familiar enough with the concepts, was wondering specifics like if you machine the base or combustion chamber any or change intake/exhaust timing at all...
Him: No I don’t do timing or machine the cylinder All I do with the intake/exhaust is take the burrs off
Me: So no adjustments to the intake or exhaust, just transfers and remove flashing, open muffler?
Him: Yeah
Me: Would that void the warranty? I guess it wouldn't matter because it's a used saw. The warranty only applies to the original purchaser...
Him: Not at my dealer and I figured I would sell it locally and my dealer would honor it
afleetcommand
Pinnacle OPE Member
Wonder who his dealer is....out in the Oneonta area. SHOS of Oneonta, NY ?? Lowes? Oneonta Equipment Rental & Sales? Has to one. Wonder where he gets his "read out"
MG porting
Pinnacle OPE Member
When it looks to good to be true it normally is I would pass on it something just don't look quite right to me it looks like there is more than a bent felling dog on it.
afleetcommand
Pinnacle OPE Member
Guess it sold. Which I hope is good for both parties.
XP_Slinger
They’re Just Saws
- Local time
- 6:09 PM
- User ID
- 845
- Joined
- Feb 9, 2016
- Messages
- 6,089
- Reaction score
- 27,522
- Location
- Central NY
So ported = MM, lower transfer hogging and casting flash clean up. Dang, I have been doing it wrong.
Wish you would've asked him about the bent outer dog. Curious what the story is....
