Holiday giving thread 2019

Cat 525 · Dec 14, 2019

Dub11 said:
I got 1 of these to give way. View attachment 212720
It's full husqvarna branded 3/8s LPX f chisel 84 dl .063 NIB.
It's like lgx but with a bumper by the depth gauge.

What's the matter Dub? Ain't got nuttin big enough to pull that chain?

cuinrearview · Dec 14, 2019

srcarr52 said:
I’ll give away one theses Foredom compatible handpieces that will chuck up to 1/4” shank with shipping to the US for the first two people who PM me.

Peeps were talking about your hand pieces at the GTG tonight. If this is compatible with the HF motor I'd really appreciate picking it up.

srcarr52 · Dec 14, 2019

cuinrearview said:
Peeps were talking about your hand pieces at the GTG tonight. If this is compatible with the HF motor I'd really appreciate picking it up.

It should fit on the HF grinder.

Which GTG was this? I hope they were kind words.

cuinrearview · Dec 14, 2019

srcarr52 said:
It should fit on the HF grinder.

Which GTG was this? I hope they were kind words.

Solsticefest up in northern MI. The best

David Young · Dec 14, 2019

srcarr52 said:
I’ll give away one theses Foredom compatible handpieces that will chuck up to 1/4” shank with shipping to the US for the first two people who PM me.

All Gone!

Very nice Shaun. I bought one from you I got a lot of use from it. Still going strong.
Very generous of you. Couple guys are getting a great gift.

Dub11 · Dec 15, 2019

Cat 525 said:
What's the matter Dub? Ain't got nuttin big enough to pull that chain?

Nope it's just too heavy.

Rob Stafari · Dec 15, 2019

3browns said:
Not sure if I am doing this right but here goes

I have a very clean, low hours PS-6400 P&C that one of you lunatics might like in your stocking this Christmas

Leftover from MMWS giving my saw his fluff and fold treatment

Shipping to USA covered

Merry Christmas

View attachment 212653

View attachment 212654

I can't say I need it, but have two 64xx that live a hard life on a double ended mill. Having a spare couldn't hurt. However, if somebody comes along that could actually use it to bring a saw back to life, I feel it would be far more appropriate to send it to them. Feel free to throw mine name in the backup stocking in nobody else does come along though. And just because we all like pictures. Regardless of all that, thank you and a very merry christmas to y'all.

K Mueller · Dec 15, 2019

*Taken* Finally got my feet back on the ground and will be posting a couple things over the next couple days.

First up is a little Granberg 12v grinder

Ryan Browne · Dec 15, 2019

ajschainsaws said:
Forgot to add overall length photo

View attachment 212685

If no one has asked for this yet, I'd love to put it to use in our orchard this winter.

Boots · Dec 15, 2019

Ryan Browne said:
If no one has asked for this yet, I'd love to put it to use in our orchard this winter.

Thats a great little hand saw, I have have had one for years now and it's still as sharp as new with moderate use.

3browns · Dec 15, 2019

Rob Stafari said:
I can't say I need it, but have two 64xx that live a hard life on a double ended mill. Having a spare couldn't hurt. However, if somebody comes along that could actually use it to bring a saw back to life, I feel it would be far more appropriate to send it to them. Feel free to throw mine name in the backup stocking in nobody else does come along though. And just because we all like pictures. Regardless of all that, thank you and a very merry christmas to y'all.

View attachment 212839 View attachment 212842

I can certainly do that and Merry Christmas to you and yours!!!

And by the way, that is some gorgeous wood...

Philbert · Dec 15, 2019

K Mueller said:
Finally got my feet back on the ground and will be posting a couple things over the next couple days.First up is a little Granberg 12v grinder
View attachment 212865

Is that the electric version of the File-N-Joint?

If so, I would be interested.

Thanks!

Philbert

Wilhelm · Dec 15, 2019

Philbert said:
Is that the electric version of the File-N-Joint?

If so, I would be interested.

Thanks!

Philbert

Chainsaw chain sharpening jig hoarder!

Seriously though, no one is more qualified to get this grinder than You.

dmb2613 · Dec 15, 2019

I have 2 NOS Stihl clutch drums , one is 404 the other 3/8 1115 series [056] free you payfor the ride pm me

Philbert · Dec 15, 2019

Wilhelm said:
Chainsaw chain sharpening jig hoarder!

I have only seen this version on YouTube.

Philbert

K Mueller · Dec 15, 2019

Philbert said:
Is that the electric version of the File-N-Joint?

If so, I would be interested.

Thanks!

Philbert

It’s all yours. I’ll get it out to you Monday.

TreeMonkey85 · Dec 15, 2019

*TAKEN* Up for the taking is this 394 carcass. Cylinder looks like it will clean up, crank rolls fairly smooth. Good builder candidate. Just pay for the ride and yours.

p61 western · Dec 15, 2019

TreeMonkey85 said:
Up for the taking is this 394 carcass. Cylinder looks like it will clean up, crank rolls fairly smooth. Good builder candidate. Just pay for the ride and yours.

I would love to have this.

p61 western · Dec 15, 2019

I will dig through some stuff to put up here.

CJ Brown · Dec 15, 2019

I don't have a lot to offer this year, but I do have this Oregon filing guide if anyone can use it.

Holiday giving thread 2019

Mastermind Approved!

Unskilled Hammer Donkey

Shop rat, backyard slice cutter.

Unskilled Hammer Donkey

Safety First !!!!!!

Saw R skeery

Pinnacle OPE Member

Attachments

Pinnacle OPE Member

Pinnacle OPE Member

Well-Known OPE Member

Here For The Long Haul!

Chainsaw Enthusiast

Here For The Long Haul!

Super OPE Member

Chainsaw Enthusiast

Pinnacle OPE Member

Super OPE Member

Attachments

Ol Mudflap

Ol Mudflap

I learned it from a hockey card...

Similar threads