Johnmn
Here For The Long Haul!
- Local time
- 1:12 AM
- User ID
- 908
- Joined
- Feb 18, 2016
- Messages
- 3,391
- Reaction score
- 12,161
- Location
- Minnesota
Here's a 99 built jonsered 2149.
Had the plastic intake clamp, I pulled the cylinder and installed a metal clamp. While the cylinder was off I deleted the base gasket. I also advance the timing because they like it! Muffler is stock non-cat, has a newish 3/8 sprocket and a Wahlbro carb.
Hard to tell in the pictures but it does have some overspray on the top cover and front handle.
Would make a nice firewood saw.
Fired saw up this afternoon started on second pull, idled and rev'd up as it should.
$225 plus shipping friends and family or add 3%
Had the plastic intake clamp, I pulled the cylinder and installed a metal clamp. While the cylinder was off I deleted the base gasket. I also advance the timing because they like it! Muffler is stock non-cat, has a newish 3/8 sprocket and a Wahlbro carb.
Hard to tell in the pictures but it does have some overspray on the top cover and front handle.
Would make a nice firewood saw.
Fired saw up this afternoon started on second pull, idled and rev'd up as it should.
$225 plus shipping friends and family or add 3%
Last edited:
.
