Post a pic of your favorite dirty worksaw

RI Chevy · Oct 29, 2019

Nice Kevin! Hows it run?
That aluminum cover must get hot!!!

Moparmyway · Oct 29, 2019

Runs pretty well, the cover stays cool enough, it hasn’t discolored or been compromised yet, and she ran a 404 with a 36 inch and 9 tooth. I’m betting that the sewer pipe exhaust is helping to keep the cover cool

trooney · Oct 29, 2019

That is a unique mod there Kevin! I like it!!

Wilhelm · Oct 29, 2019

Makita XS5000 & Dolmar MMWS6100

Ketchup · Nov 2, 2019

You guys need more dirt on your dirty saws. That 064 is sweet!

Moparmyway · Nov 2, 2019

Ketchup said:
You guys need more dirt on your dirty saws. That 064 is sweet!

Where do you see an 064 ?

Bigmac · Nov 2, 2019

Moparmyway said:
Where do you see an 064 ?

I looked back 3 pages..and couldn’t find it!

huskihl · Nov 2, 2019

Ki

Moparmyway said:
Where do you see an 064 ?

Kinda looks like a 6. Me thinks it’s an 8

Especially running 36” .404x9

rogue60 · Nov 2, 2019

Ketchup said:
You guys need more dirt on your dirty saws. That 064 is sweet!

Ok

Lol

Bigmac · Nov 2, 2019

rogue60 said:
Ok
View attachment 205823 View attachment 205824 View attachment 205825 View attachment 205826
Lol

Saw abuse! Lol

rogue60 · Nov 2, 2019

Now winter's over here I might have time to give one me ms170's a hit with air, I use it to cut off cuts for firewood at home.
I buy cheap filters and change them out every few months.
In use I wash them out with my 2T mix every time I sharpen the chain but as you can see the filter is dry! that's thanks to running a synthetic oil it evaporates pretty quick leaving no oil on the filter.
I've got to remember next time I'm in town to get me some of me good dino oil and stop using the synthetic oil I buy for my MX bikes..

Wilhelm · Nov 2, 2019

Why even use an air filter when there are a bunch of large holes all around the air filter box?
If I see that correctly those holes go through into the air box underneath the filter element?!

rogue60 · Nov 2, 2019

Wilhelm said:
Why even use an air filter when there are a bunch of large holes all around the air filter box?
If I see that correctly those holes go through into the air box underneath the filter element?!

Air comes in through the bottom up through the filter into the air box top cover makes up the top of the air box then down that hole in the middle of the air filter on it's way to the carb.

DND 9000 · Nov 2, 2019

These holes are not originally in there.

Only filter housing 1130 140 2814 (marking 1130 124 3510 C) can be reworked with an 8mm hole (on the marked position), that chips can escape more easy.

rogue60 · Nov 2, 2019

DND 9000 said:
These holes are not originally in there.

View attachment 205837
Only filter housing 1130 140 2814 (marking 1130 124 3510 C) can be reworked with an 8mm hole (on the marked position), that chips can escape more easy.

Yeah holes are not factory I drilled them for more air flow into the air box.
Trust me air has to go through the filter to get to the carby intake, the holes I drilled are on the air box intake dirty air side of the filter.
Someone with a 170 help me explain how the airbox works on these saws lol

PA Dan · Nov 2, 2019

rogue60 said:
Yeah holes are not factory I drilled them for more air flow into the air box.
Trust me air has to go through the filter to get to the carby intake.
Someone with a 170 help me explain how the airbox works on these saws lol

I got 2 170's sitting on the floor in the garage. Got them on a lot that I picked up from Craigslist. I havent had the time to play with them yet. What have you done to make them run better?

rogue60 · Nov 2, 2019

PA Dan said:
I got 2 170's sitting on the floor in the garage. Got them on a lot that I picked up from Craigslist. I havent had the time to play with them yet. What have you done to make them run better?

Not to much as it still has the no high or low carb didn't port it as such just done funky stuff to port walls and gave it more air and opened exhaust a little.

PA Dan · Nov 2, 2019

rogue60 said:
Not to much as it still has the no high or low carb didn't port it as such just done funky stuff to port walls and gave it more air and opened exhaust a little.

A Walbro 215 carb works great on them.

Post a pic of your favorite dirty worksaw

Aluminium Member

Its just a saw

Mastermind Approved!

Its just a saw

Admitted Woodaholic

Here For The Long Haul!

Epoxy member

Its just a saw

Mastermind Approved!

Muh fingers look really big

Here For The Long Haul!

Mastermind Approved!

Here For The Long Haul!

Here For The Long Haul!

Here For The Long Haul!

Pinnacle OPE Member

Here For The Long Haul!

Mastermind Approved!

Here For The Long Haul!

Mastermind Approved!

Similar threads