High Quality Chainsaw Bars Husqvarna Toys

SOLD 100% OEM except for top cover and a f cover STIHL MS660 Magnum with 28"Rollomatic lightly used

Trader history (0)

Pugsley555

Well-Known OPE Member
Local time
8:10 AM
User ID
5641
Joined
Mar 18, 2018
Messages
144
Reaction score
73
Location
Fairview
Country flag
Screenshot_20191012-174744.png Screenshot_20191012-174740.png Screenshot_20191012-174735.png Screenshot_20191012-174723.png I have a newly rebuilt still ms660 Magnum weather at 28 in Stihl rollomatic bar lightly-used don't even think there's any paint off of it with a chain and excellent condition.
OEM
BEARINGS
INTAKE BOOT
CARBURETOR KIT
NOS 660 MAGNUM DECAL PLATE.(AM top cover & AF COVER)
OEM needle bearings and the clutch and the wristpin.
OEM still 066 cylinder with decomp was the older version with larger ports and more power (from what I was told and from comparison)
OEM piston and caber rings.
I personally powder coated the crankcase starter assembly and clutch cover myself did a very good job if I have to say so myself although I did use a oil-based black enamel to paint on where the factory had the raised stihl decal on the sprocket cover and a couple other places where they had it painted like that as well.
After assembly I started it all up to begin the breaking process ran phenomenally for, I don't know maybe two or three six foot rows of trees I've been hearing in the yard. Shortly after finishing one of the smaller trees or logs it bogged out. I went to start it back up and I could tell right off the flywheel was just spinning I don't know if the woodruff key was too worn and slid out but either case I pulled the starter assembly off and removed it found that the threads on the crank were slightly bugard up. After a few weeks of waiting on another crank few developments came up at the house where I was living so I wasn't there that much and found out day before yesterday I have a lot of things to clear out of my shop downstairs and didn't have any kind of time to be turn anything down I just have a bunch more to put together so I recheck threads and they were good enough to rethread and put on the flywheel bolt I put in a new woodruff key install the flywheel tightened down the newly threaded crank shaft nut reassembled it and it started up and runs like a scalded dog. If whoever ends up with it wants it I still will include hey good 660 crank to go with it but as of now there is no need for it. I'm looking to get $950.00 shipt PayPal friends and family otherwise you must pay the 3% tax tour charge for goods and services.
If anyone wants or needs any more pictures let me know I will be back over there to start picking up some of my tools and other saws later on today actually it won't be later today it will be Tuesday afternoon and I can put more pics up or show you the PSI produces right now last time I checked it was 180 I think but my Gage is a little hinky. The piston and cylinder are like new as is everything else
 
Last edited:

Pugsley555

Well-Known OPE Member
Local time
8:10 AM
User ID
5641
Joined
Mar 18, 2018
Messages
144
Reaction score
73
Location
Fairview
Country flag
Someone asked me if it ran and it does great actually but with the crank being stripped no one could see it run. There for tomorrow I'm going to take an hour or so and rethread the crank take my time do it right make sure it's safe and then put it up for sale for $900-$975. I'll include the other crank as well but at least it will be a running very well operating saw so I will look for the posting to be back up by tomorrow evening if interested.
 

Pugsley555

Well-Known OPE Member
Local time
8:10 AM
User ID
5641
Joined
Mar 18, 2018
Messages
144
Reaction score
73
Location
Fairview
Country flag
How is it 100% OEM if it has aftermarket parts ??

:confused:
oh you're right sir I totally didn't think about the two pieces of plastic on top with OEM badge in there I will change that to 90% thank you for catching that I have a couple other ads up Johnson builders and stuff I have some pictures later on if you want to check them out I'm kind of new to this so you'll have to forgive me just let me know if you see anyting thanks again
 

birdmeter

Pinnacle OPE Member
Local time
7:10 AM
User ID
4503
Joined
Nov 2, 2017
Messages
656
Reaction score
2,271
Location
tulsa okla
Country flag
I'm dropping the 662 600. You pay the shipping PayPal friends and family or you have to pay the 3% I can't afford to lose any more on it are you dropping the 660 two 600 dollars
 

Jimmy in NC

Pinnacle OPE Member
Local time
8:10 AM
User ID
57
Joined
Dec 23, 2015
Messages
1,994
Reaction score
8,010
Location
North Carolina
Country flag
Lol
Hey jimmy
Hey Dan! OEM logo in the bag.


OK... to the OP... good luck with the sale. 660's are a love or hate thing. Good luck with the sale and I am done derailing your thread.
db53a203aacd73fc06fad3ecae93dc45.jpg
 

Pugsley555

Well-Known OPE Member
Local time
8:10 AM
User ID
5641
Joined
Mar 18, 2018
Messages
144
Reaction score
73
Location
Fairview
Country flag
Okay so around 90 to 95% of the saw is all OEM sorry the to the top plastic and the air filter cover isn't everything else is and unless someone and gray still on the bucking spikes they are to but I guess someone could engrave that on there it's worth every bit of what I got it in there for y'all didn't have a problem or nobody had a problem or nobody *b-worded when other old boy had a rebuilt 660 same setup as mine powder coat and everything only difference is mine had that buggered up crankshaft thread which I fixed tighten down good and got a new woodruff key starts of Easley runs awesome cuts great I'm leaving and adding that other crankshaft and of course the 28in rollomatic bar that hasn't hardly seen anywhere to it that other post was when I was just going to sell as is but I pulled it off the post I mean for six hundred.
I tell you what if y'all will but more interest in a saw instead of just picking on me which usually I don't mind and it's kind of fun most of the time but I just had my whole shop pretty well destroyed and my life kind of turned upside down for the moment so forgive me if I seem a little agitated with you guys you're always cool with me and always help me out but he'll I'll drop this thing 2 $850 and y'all pay shipping. Did all the powder cutting myself even dead the muffler and black textured high temp powder coat I really need this thing gone as soon as possible because I have nowhere to go I am literally sleeping in my car with a covered trailer with the parts and saws I can find my only hope right now is that sutherby auctions gets it back in touch with me so I can send them all my inherited lighters that I got from my great-grandfather
 

CR888

Here For The Long Haul!
Local time
11:10 PM
User ID
452
Joined
Jan 9, 2016
Messages
2,622
Reaction score
10,578
Location
Australia
Country flag
I don't think anyone want you too take any criticism personally, its just a lot of what you write doesn't make a lot of sense so they are just qualifying what it is exactly for sale and how much you want for it. An accurate honest description will give you least hassles selling saw and repeat business. Some of your description I have no idea what your talking about. Good luck.
 

Lightning Performance

Here For The Long Haul!
Local time
8:10 AM
User ID
677
Joined
Jan 26, 2016
Messages
10,991
Reaction score
28,050
Location
East of Philly
Hey Dan! OEM logo in the bag.


OK... to the OP... good luck with the sale. 660's are a love or hate thing. Good luck with the sale and I am done derailing your thread.
db53a203aacd73fc06fad3ecae93dc45.jpg
Love / Hate

I'd love for you to ship me those parts you put up for sale six months ago. I hate you keep making me wait.

Love / Hate
 
Top