NSP2. Cuz PA WiFi sucks

qurotro · May 22, 2019

Definitive Dave said:
picture please, I am trying to figure out what you mean, I have a hard time imagining a hole in the crank
Dave

cus_deluxe said:
many husky saws have a hole in crank so sprocket bearing can be greased through crank stub, never seen one open to case inside tho

Some guys at the AS site discuss this but no conclusion. This hole on the crank<pto side> is directly through the inside of the balancer. I flush the crankcase with gas and found out gas leak through this hole. It is said that the newer 3120 share crank with concrete saws. Also curious no air leaks?
Pic from google.

Definitive Dave · May 22, 2019

qurotro said:
Some guys at the AS site discuss this but no conclusion. This hole on the crank<pto side> is directly through the inside of the balancer. I flush the crankcase with gas and found out gas leak through this hole. It is said that the newer 3120 share crank with concrete saws. Also curious no air leaks?
Pic from google.
View attachment 182730

that's for greasing the sprocket bearing as Custer said but I didn't know it was open to the crankcase as well, that seems like an instant air leak unless I am missing something

Czed · May 22, 2019

We do not sell carburetor rebuild kits
The stihl dealer told me.
That's funny i bought them there for 30+ year's.

dall · May 22, 2019

usmcbuckwild said:
Is there a single highway in PA that isn’t down to 1 lane for construction????? Holy sheepshit, Batman! 8.5 miles of cones and not a single bit of construction, maintenance, not even a fat guy leaning on a shovel.

lmao how do you think my trip was
Northern pa New York and ct all road construction or pot holes to drown in

Stump Shot · May 22, 2019

qurotro said:
Some guys at the AS site discuss this but no conclusion. This hole on the crank<pto side> is directly through the inside of the balancer. I flush the crankcase with gas and found out gas leak through this hole. It is said that the newer 3120 share crank with concrete saws. Also curious no air leaks?
Pic from google.
View attachment 182730

The drum bearing rides there. No air leak. All Pro Husqvarna saw's are this way. Just hit the end of the crank after cutting with a push greaser and you don't have to take the clutch off to grease the bearing.

czar800 · May 22, 2019

Good afternoon fellas. We just finished for today a lot earlier than expected! I think it’s time to find a nice slab from the backside of a steer!

hoskvarna · May 22, 2019

P.M.P. said:
I'm the same way I just shakem up. Pull it a few times. I got a 99 dollar crapsman weedwack bought in 2005 only replaced a spark plug. Gas stays in it over winter fires up every spring.

Its poor gas wether it has E in it or not.
Some oxygenated bs.
I been running the can gas. Costs more but better fuel imo.

Sent from Hoskey Hills

Stump Shot · May 22, 2019

Some storm damage from last night, was Super Shindaiwa to the rescue. Lol

Will get the rest for firewood later on a nice day and a good plan.

usmcbuckwild · May 22, 2019

Stump Shot said:
The drum bearing rides there. No air leak. All Pro Husqvarna saw's are this way. Just hit the end of the crank after cutting with a push greaser and you don't have to take the clutch off to grease the bearing.

But he is saying on the 3120 crank he has that hole continues through the crank. When he flushed the crankcase with fuel, it came OUT that hole. (That crank stub being drilled for greasing the clutch bearing is VERY handy!!)

usmcbuckwild · May 22, 2019

dall said:
lmao how do you think my trip was
Northern pa New York and ct all road construction or pot holes to drown in

Don’t forget we did all of PA with a moving truck hauling an SUV and both were packed to the gills plus the Expedition packed tight towing a trailer. Albeit it was dark by the time we went through PA, which was probably worse.

czar800 · May 22, 2019

That’s better!

czar800 · May 22, 2019

Czed · May 22, 2019

czar800 said:
View attachment 182748

Tor R · May 22, 2019

Czed said:
https://www.arboristsite.com/community/threads/good-morning-check-in.103636/page-18016#post-6897743
A guy wants 400.00 for this 246 if your interested
Tell me I'll get the info.

a minty 246 is worth 400, got a minty one a couple years ago, G & cat. One collector saw is enough for me.

Strugling to find a couple 238 cranks, its the only saw model I'm really interested to build nowadays, Dave.

leadfarmer · May 22, 2019

Czed said:
View attachment 182757

Whatinthetarnations is that ?

leadfarmer · May 22, 2019

leadfarmer said:
Whatinthetarnations is that ?

The frog egg stuffs

Tor R · May 22, 2019

There is a guy selling a couple 242 part saws in Germany, I'm kinda interested, looks to be a KS top end kit.....

On the other side, I should have enough 242's already

Czed · May 22, 2019

leadfarmer said:
Whatinthetarnations is that ?

Rotisserie chicken

Czed · May 22, 2019

leadfarmer said:
The frog egg stuffs

Old fashioned mustard
Really good actually.

Czed · May 22, 2019

Tor R said:
There is a guy selling a couple 242 part saws in Germany, I'm kinda interested, looks to be a KS top end kit.....
View attachment 182759

On the other side, I should have enough 242's already

Hoarder

NSP2. Cuz PA WiFi sucks

Cookie Cutter

Piss Rev Mafia Member

Aluminium Member

Mastermind Approved!

Disciple of Monkey's

Mastermind Approved!

Mastermind Approved!

Disciple of Monkey's

Buck

Buck

Mastermind Approved!

Mastermind Approved!

Aluminium Member

Newbie

Hot Rod !!!

Hot Rod !!!

Newbie

Aluminium Member

Aluminium Member

Aluminium Member

Similar threads