How often do you use your chainsaw?

Shanesaw80 · Feb 16, 2019

First off I really enjoy this site and reading all the different content and information from other people so I’m sorry if there’s already thread about this but I searched and couldn’t find anything.

I know there’s a ton of different types of chainsaw experience on the forum, some who cut full time, some who use it as a hobby and some who are more into the building and fixing of the saws. It’s great hearing and learning from different people.

I’m on the side of a full time faller/cutter. When I’m not falling trees myself I teach falling courses and basic chainsaw safety courses. I do all of my own maintenance and have rebuilt stock saws over the years but when it comes to porting and things like that I’m completely lost but trying to learn more about it.

While driving back to the hotel from work the other night I got to thinking about how many cutting hours I actually put on a chainsaw on average. I would say I put anywhere between 175-200hrs a month of actual cutting time. Some months a lot more with the added daylight in the summer but I rarely go under that. Got me wondering how much others run their saws? Or how much time you spend doing other things like building and porting them? I guess I’m just curious as to what type of experience you have with chainsaws, whether it’s falling trees, fixing them or both. I’m interested in hearing what you guys do!

dmb2613 · Feb 16, 2019

I run on average 5 used saws a day, just long enough to make sure they are right and service about 2 average a day [ new saws ] . Then at home in the summer I run a few more lol

Duane(Pa) · Feb 16, 2019

I suppose I burn about 12 gallons of mix a year. That would be about a quart a week right? Total hobby for me. I like to buck firewood. Split, stack, haul, not so much. I sell most of what I cut, and burn a little in the shop, mostly uglies and cookies.

Dustin4185 · Feb 16, 2019

It varies greatly for me. I enjoy running saws and cutting wood. I also run saws for work on a wildlife management area. After big storms or when daylighting roads, we run them a lot. I tend to be the primary feller and let one of the others buck and the other on equipment to move it. I put an hour meter on a work saw just to see what we do use them in a year. My problem is I like my ported saws so well, I use them instead!

MotherGoose · Feb 16, 2019

Full time faller here. 6 hours on the saw 5 days a week

Marshy · Feb 16, 2019

Oh, you're suppose to use them??

merc_man · Feb 25, 2019

Not much trigger time for me anymore since my son started cutting and loves it. I used to sell firewood but i slowed down cause bad back. Just my own personal firewood about 12 or so face cord a year.
Might start selling again who knows. Its alot of extra work but i enjoy it.

Sent from my SM-G950W using Tapatalk

huskyboy · Feb 25, 2019

I run about 1-2 gallons a day doing the tornado salvage logging job we’re on right now. Probably burn more falling since it’s faster paced than the tricky tornado stuff.

FergusonTO35 · Feb 25, 2019

I come and go in spells. It really depends on if there is any wood nearby begging to be cut and how engrossed I am in other hobbies at the time. I would guess the average is around 20-40 hours of saw use a year. Divided by four running saws and that really ain't much!

fearofpavement · Mar 10, 2019

My saw usage is very intermittent. If I'm doing a tree job, I may run a saw an hour or two in a day. I test saws and probably spend as much time cutting cookies as I do cutting firewood. Yesterday I felled a burning snag with a pole saw (didn't dare to get any closer) and then bucked it up so I could move the burning pieces to a pile. Overall, I'd say I probably don't run a saw more than an hour a week. Can spend all day on a tree job and burn a quart or two of gas.

pgk1 · May 6, 2019

I'm just a weekend warrior, cut for firewood and basic clean up when needed around the house.

KYsawman · May 6, 2019

I haven’t cut for a while, had a few changes in my life and have found myself living in my travel trailer in a RV park. Did get to make a couple cuts last week when I found a tree across a two lane road. Used to cut just about every day.

HYPERSAWS · May 6, 2019

Full time faller 6 hours a day @ least 5 days a week in southwest Oregon

FergusonTO35 · May 6, 2019

KYsawman said:
I haven’t cut for a while, had a few changes in my life and have found myself living in my travel trailer in a RV park. Did get to make a couple cuts last week when I found a tree across a two lane road. Used to cut just about every day.

Sorry to hear that. I 'spose most of us are closer to living there or a crummy apartment than we would like to admit. A lost job or big medical problem would do it quick.

How often do you use your chainsaw?

Shanesaw80

Tree Assassin

dmb2613

Super OPE Member

Duane(Pa)

It's the chain...

Dustin4185

Pinnacle OPE Member

MotherGoose

Well-Known OPE Member

Marshy

WFO Cutting

merc_man

merc_man

huskyboy

Sorta a husqvarna guy...

FergusonTO35

Here For The Long Haul!

fearofpavement

Pinnacle OPE Member

pgk1

Well-Known OPE Member

KYsawman

Pinnacle OPE Member

HYPERSAWS

West coast cutter

FergusonTO35

Here For The Long Haul!

Similar threads