Husqvarna 550xp pop up

hseII · Dec 8, 2018

Mastermind said:
Well......you fired a high velocity round thru your foot here.

But will it kill a moose?

Sent from my iPhone using Jon1212 Pro

WoodsliverDan · Dec 8, 2018

Mastermind said:
I've got 6 MS261s on the bench......and I'm doing the transfer entrances different on 4 of them. Then I'll run them all with the same B&C in the same wood, and video each cut. That way I can be sure which way made what differences. Without that sort of testing......it's tough to find real gains. Just making a little bump on a piston ain't anything ground breaking. LOL

Ok, I got 3 550s on my bench doing the same thing. I'm litterly just doing working on these for my own entertainment. I'm not trying to take over yours or Scott's work. Internet maybe forever, but im.not trying to win a popularity contest.

WoodsliverDan · Dec 8, 2018

hseII said:
But will it kill a moose?

Sent from my iPhone using Jon1212 Pro

Maybe a tree monkey.

huskihl · Dec 8, 2018

Mastermind said:
I've got 6 MS261s on the bench......and I'm doing the transfer entrances different on 4 of them. Then I'll run them all with the same B&C in the same wood, and video each cut. That way I can be sure which way made what differences. Without that sort of testing......it's tough to find real gains. Just making a little bump on a piston ain't anything ground breaking. LOL

I don't often have 4 of the same model here at the same time. But I take videos and timed cuts of every single saw I do and try to use the same size and species of wood. I can't have perfect results that way, but I can usually feel or hear if what I did differently helped or hindered

huskihl · Dec 8, 2018

hseII said:
But will it kill a moose?

Elk! Dammit.
Will it kill an elk!?

hseII · Dec 8, 2018

WoodsliverDan said:
Maybe a tree monkey.

Keep Dreaming Ralphie.

Those BB guns are dangerous.

Sent from my iPhone using Jon1212 Pro

hseII · Dec 8, 2018

huskihl said:
Elk! Dammit.
Will it kill an elk!?

My Sincerest Apologies Mr. Texas Button.

Sent from my iPhone using Jon1212 Pro

XP_Slinger · Dec 8, 2018

WoodsliverDan said:
Ok, I got 3 550s on my bench doing the same thing. I'm litterly just doing working on these for my own entertainment. I'm not trying to take over yours or Scott's work. Internet maybe forever, but im.not trying to win a popularity contest.

Nothing is about popularity in here man but manners go a long way, it doesn’t matter who you’re talking too. Next time you get an answer you don’t like or don’t understand simply ask questions to further the discussion for your benefit and everyone else’s. Chest thumping “prove it” exchanges benefit no one and as you now know, are very unwelcome here.

Stump Shot · Dec 8, 2018

WoodsliverDan said:
Ok, I guess timing advance, pop up, base cut and changing port timing are mild mods. My apologies. Didnt realize there was so much more you could to do a 550xp to make them wild. Im.not offended, I'm just questioning what he's saying due to the fact it's not in line with what I've been told and found so far.

The shot went off when you took that hot start issues was caused by over heating, if the saw were overheating we would be seeing piston seizure issues instead. The carbs on these are getting too warm to and percolate the fuel to vapor lock the engine. Generally caused by shutting the saw off for a short while and the heat soaking into the carb box. Usually a push of the primer button rectifies this situation. These are two entirely different situations - overheating and hot start.

huskihl · Dec 8, 2018

WoodsliverDan said:
but im.not trying to win a popularity contest

How's that working out for you?

Kind of a shame, really. If you look back at the likes you received in your first few posts in this thread, you'd see that the forum was genuinely interested in what you were doing. Shortly after that, things went down the *s-wordter.

Next time Scott tries dropping you a breadcrumb trail, pick up the pieces and make a sammich

Fruecrue · Dec 8, 2018

huskihl said:
How's that working out for you?

Kind of a shame, really. If you look back at the likes you received in your first few posts in this thread, you'd see that the forum was genuinely interested in what you were doing. Shortly after that, things went down the *s-wordter.

Next time Scott tries dropping you a breadcrumb trail, pick up the pieces and make a sammich

Best answer

WoodsliverDan · Dec 8, 2018

Stump Shot said:
The shot went off when you took that hot start issues was caused by over heating, if the saw were overheating we would be seeing piston seizure issues instead. The carbs on these are getting too warm to and percolate the fuel to vapor lock the engine. Generally caused by shutting the saw off for a short while and the heat soaking into the carb box. Usually a push of the primer button rectifies this situation. These are two entirely different situations - overheating and hot start.

I have a 2013 that was obviously overheated. Pressure and vacuum tested fine.

P.M.P. · Dec 8, 2018

Uhmm... Excuse me for being a askhole butt is this saw running yet?
wtf

Mastermind · Dec 8, 2018

WoodsliverDan said:
Maybe a tree monkey.

You really want me to ban your young ass don't you? LOL

WoodsliverDan · Dec 8, 2018

XP_Slinger said:
Nothing is about popularity in here man but manners go a long way, it doesn’t matter who you’re talking too. Next time you get an answer you don’t like or don’t understand simply ask questions to further the discussion for your benefit and everyone else’s. Chest thumping “prove it” exchanges benefit no one.

Right

XP_Slinger · Dec 8, 2018

WoodsliverDan said:
I have a 2013 that was obviously overheated. Pressure and vacuum tested fine.

Overheated how?

Mastermind · Dec 8, 2018

WoodsliverDan said:
Ok, I got 3 550s on my bench doing the same thing. I'm litterly just doing working on these for my own entertainment. I'm not trying to take over yours or Scott's work. Internet maybe forever, but im.not trying to win a popularity contest.

Three non running saws is not quite the same......but you carry on. LMAO

Mastermind · Dec 8, 2018

XP_Slinger said:
Overheated how?

Some young dumb ass ran a dull chain on it for three days in midsummer?

WoodsliverDan · Dec 8, 2018

Mastermind said:
You really want me to ban your young ass don't you? LOL

Not at all, but everyone else is poking fun at me. It was a joke.

WoodsliverDan · Dec 8, 2018

Mastermind said:
Some young dumb ass ran a dull chain on it for three days in midsummer?

Idk maybe, they came from tree monkeys neck of the woods. Not putting any understaments here they actually came from Wisconsin.

Husqvarna 550xp pop up

AKA - Karenberly's Husband

Mechanical Beaver Builder

Mechanical Beaver Builder

Muh fingers look really big

Muh fingers look really big

AKA - Karenberly's Husband

AKA - Karenberly's Husband

They’re Just Saws

Disciple of Monkey's

Muh fingers look really big

certified hand catcher

Mechanical Beaver Builder

Stiff Member

Chief Cat Herder

Mechanical Beaver Builder

They’re Just Saws

Chief Cat Herder

Chief Cat Herder

Mechanical Beaver Builder

Mechanical Beaver Builder

Similar threads