SELLING Husqvarna 359

tickbitintn · Jul 15, 2018

Had this on the shelf for a while.... Need the space more than I need the saw...
I ported it a few years ago and did a thread on sawhawgz... (but it was before a server change over so I think it's gone now)
Asking $400 plus shipping.

Sent from my XT1635-01 using Tapatalk

tickbitintn · Jul 15, 2018

I ended up pulling the top end for a good check over and to snap a couple pics.

Meteor piston was installed at time of porting.
Muffler baffle holes were enlarged and a second port added to front with a screen held in with a rivet. (because I don't like loud)

Timing#'s are
Ex- 105
Tr- 120
In- 79
Squish is .021 with just a gasket delete and no machine work to cyl.

Sent from my XT1635-01 using Tapatalk

tickbitintn · Jul 19, 2018

How about $400 shipped.
I can mod the muffler for more flow (and probably noise) very easily if so desired...

Sent from my XT1635-01 using Tapatalk

Dub11 · Jul 19, 2018

tickbitintn said:
How about $400 shipped.
I can mod the muffler for more flow (and probably noise) very easily if so desired...

Sent from my XT1635-01 using Tapatalk

Mine had a pipe and a gill opening on the fly wheel side. Really not that bad.

tickbitintn · Jul 19, 2018

I originally had a square opening out the front with a screen riveted over....
Very loud with sound bouncing off the log/ wood right straight back at you.
A red97 deflector welded over aiming the sound down it is quite quiet...
But I feel it slowed the saw down a bit...

Sent from my XT1635-01 using Tapatalk

tickbitintn · Sep 22, 2018

Bump!
Lol.
Been super busy and forgot I had this on here...
Cut this elm up with it today that fell a few weeks ago....
New price $375 and can include a 3/8 tsumara roller nose and 64dl, bar and chain respectively, both great condition..
Will be attending MMWS fall gtg...
If interested and attending (or know someone who is) you can test drive it..

Sent from my XT1635-01 using Tapatalk

Mkinslow · Sep 26, 2018

tickbitintn said:
Bump!
Lol.
Been super busy and forgot I had this on here...
Cut this elm up with it today that fell a few weeks ago....
New price $375 and can include a 3/8 tsumara roller nose and 64dl, bar and chain respectively, both great condition..
Will be attending MMWS fall gtg...
If interested and attending (or know someone who is) you can test drive it..

Sent from my XT1635-01 using Tapatalk

Dang bud I figured you would have already sold this by now. Great guy to deal with here

bark · Sep 26, 2018

I also tried to send this seller a pm. Since I am not very handy on these forums I don’t know if it worked so I thought I would also post here especially being that I just signed up this morning. If this post works I would like to buy this saw.

Dub11 · Sep 26, 2018

bark said:
I also tried to send this seller a pm. Since I am not very handy on these forums I don’t know if it worked so I thought I would also post here especially being that I just signed up this morning. If this post works I would like to buy this saw.

Welcome to the forum!

bark · Sep 26, 2018

Dub11 said:
Welcome to the forum!

Thank you.

Mkinslow · Sep 26, 2018

bark said:
I also tried to send this seller a pm. Since I am not very handy on these forums I don’t know if it worked so I thought I would also post here especially being that I just signed up this morning. If this post works I would like to buy this saw.

I know he stays pretty busy. Sometimes its awhile before he replies

Sent from my SM-G892A using Tapatalk

bark · Sep 26, 2018

Mkinslow said:
I know he stays pretty busy. Sometimes its awhile before he replies

Sent from my SM-G892A using Tapatalk

Thanks for the heads up. I mostly wasn’t sure if the pm would go through due to being a new member and not knowing restrictions and such. For the record he has responded.

tickbitintn · Sep 26, 2018

Sorry guys covered up right now and terrible reception area for cell ...
Will return PM's this evening

Sent from my XT1635-01 using Tapatalk

tickbitintn · Sep 26, 2018

PM's sent...
Thanks for your patience...
Alarm went off a 5am... sent last post when i finally got around to breakfast...LOL
Gonna grab a bite and a shower.... both well needed.. LOL

bark · Sep 26, 2018

tickbitintn said:
PM's sent...
Thanks for your patience...
Alarm went off a 5am... sent last post when i finally got around to breakfast...LOL
Gonna grab a bite and a shower.... both well needed.. LOL

I definitely understand. It’s all good on my end.

huskytime · Sep 27, 2018

A ported 359 is a very handy saw, It’s my go to

PA Dan · Sep 27, 2018

It sure is! I also like mine! Just have to get more run time on it!

bark · Oct 2, 2018

I assume I would need an adapter from @Homelite410 to run my Stihl bars on this saw? Can someone confirm this?

huskihl · Oct 2, 2018

bark said:
I assume I would need an adapter from @Homelite410 to run my Stihl bars on this saw? Can someone confirm this?

Yes, you may also have to lengthen the bar slot

huskihl · Oct 2, 2018

bark said:
I assume I would need an adapter from @Homelite410 to run my Stihl bars on this saw? Can someone confirm this?

huskihl said:
Yes, you may also have to lengthen the bar slot

I take that back. 359 uses a smaller k095 bar and won't work with the Stihl bars

SELLING Husqvarna 359

Pinnacle OPE Member

Pinnacle OPE Member

Pinnacle OPE Member

Saw R skeery

Pinnacle OPE Member

Pinnacle OPE Member

Here For The Long Haul!

Well-Known OPE Member

Saw R skeery

Well-Known OPE Member

Here For The Long Haul!

Well-Known OPE Member

Pinnacle OPE Member

Pinnacle OPE Member

Well-Known OPE Member

Super OPE Member

Mastermind Approved!

Well-Known OPE Member

Muh fingers look really big

Muh fingers look really big

Similar threads