MCCULLOCH The official McCulloch thread

Yukon Stihl · Jun 2, 2018

heimannm said:
Around here a "Batteries Plus" store can make up the replacement cells.

Mark

Any suggestions for those of us that live in the middle of nowhere...
Or probably just for me?

heimannm · Jun 2, 2018

Check them out on line.

Mark

Al Smith · Jun 3, 2018

On that battery deal,a guy at work,Jim something rebuilt one with the replacement cells used in things like battery drills Said it wasn't a big deal to do .---Google----

Funny thing is he had put on a GTG a few years back near Venedocia Ohio and later worked where I do .He's been there a year and a half before I knew it .Looked me up one day and surprised me

PogoInTheWoods · Jun 4, 2018

Jim Rigdon. @boda65 Great guy. Has some nice Macs and put on a great GTG. Well attended by some of the regional AS heavyweights of the day. Macs were well represented.

Steve · Jun 4, 2018

Yukon Stihl said:
I need a battery pack as well...
Where do you get the battery's to build the pack?
Thanks

I they are sub-C nickel cadmium cells. I used 10, 800mA cells in series to get 12 volts. You can source them online or get them at a hobby store. Make sure you get the ones with tabs, it's easier to solder them all together.

Al Smith · Jun 4, 2018

Jim got either a 797 or a 795 Mac from somebody on this site and as yet has not had the time to go through it .He got caught up in the "gold rush " like the rest of us from nearly unlimited over time . He used sub c cells on his battery rebuild .I priced them on the net from some jobber in Mansfield Ohio ,like a couple bucks a pop .Had the bright idea of rebuilding some DeWalt 18 volt batteries for my battery operated stuff but since have collected more than I'll likely use in the next 5 years .

PogoInTheWoods · Jun 4, 2018

RandyMac · Jun 4, 2018

Who is that old guy?
LoL!

Al Smith · Jun 4, 2018

Age is only a state of mind

That picture is the 805 with an 850 engine stuffed under the shrouding .Twas a sad day indeed when after rebuilding the 805 engine I somehow straight gassed it with a primer bottle . Sh---er things happen .

NeSurcaster · Jun 5, 2018

Man I bet that was a sad day, couldn't imagine that feeling. If I would of rebuilt it a little straight gas wouldn't of made much of a difference.

Al Smith · Jun 5, 2018

It had been running .I dropped a dead 24" maple with it .Then for no reason it died . Primed it ,ran about 2 minutes and tied up .I've got the engine,cylinder can be saved,piston is toast .No big deal .As soon as I find a piston instead of an 805 with an 850 engine it will be an 850 with an 805 engine .It's rather low on the priority list at the moment

Brewz · Jun 9, 2018

Hey Folks.
Id love to restore and build a fast 99cc mac just for the experience.
I think as a saw enthusiast its something worth doing.
Im thinking 99cc as the 125's are just too damn hard to find and expensive cause its what most people want.
Im thinking pipe saw.

What do you Mac experts recommend?

heimannm · Jun 9, 2018

Try to find a 795, NOS pistons and cylinders are out there and the basic design makes them relatively easy to modify. Biggest trouble area is trying to improve on the carburetor and intake, not a lot of room under the hood.

Mark

Lee H · Jun 10, 2018

Build a saw with a Mac 91, 92 or 93 kart motor. They are 100cc's and would
put a big smile on anyones face.

heimannm · Jun 17, 2018

I came home from Oregon with a few more saws that I left home with.

Mark

PogoInTheWoods · Jun 17, 2018

Cool. Would be interested in a PM850 project if there's one buried there somewhere in the mix!

PogoInTheWoods · Jun 17, 2018

But in the meantime, I finally scored a 10-10S..., a crazy clean one. So I'm just gonna gloat on the Mac threads for a while myself today. LOL This saw was an Ohio Dept. of Wildlife unit. Just an exceptional find that came my way by a tip from @old 040 who's not too far from me and was nice enough to alert me to its availability. A million thanks, my man.

heimannm · Jun 17, 2018

10-10s is a 57 cc model like the PM55, 555, and 570. I have a couple as well, at least one in very good condition and they are nice saws to use even without AV. That said, I also have a PM55 (short clutch cover with the brake) which is my favorite little saw with a 16" bar. The Jonsered 2050 is lighter but I get tired of waiting for it to get through a log. With the PM55 there is no waiting...

Mark

old 040 · Jun 17, 2018

PogoInTheWoods said:
But in the meantime, I finally scored a 10-10S..., a crazy clean one. So I'm just gonna gloat on the Mac threads for a while myself today. LOL This saw was an Ohio Dept. of Wildlife unit. Just an exceptional find that came my way by a tip from @old 040 who's not too far from me and was nice enough to alert me to its availability. A million thanks, my man.

View attachment 129014

View attachment 129015

View attachment 129016

View attachment 129017

View attachment 129018

You're most welcome Poge!.....

ajschainsaws · Jun 17, 2018

PogoInTheWoods said:
Cool. Would be interested in a PM850 project if there's one buried there somewhere in the mix!

Very nice collection you purchased , could there be a few Italian built macs in there somewhere
Or maybe a double eagle 80 in that pack

MCCULLOCH The official McCulloch thread

Pinnacle OPE Member

Here For The Long Haul!

Here For The Long Haul!

Pinnacle OPE Member

Excellence!

Here For The Long Haul!

Pinnacle OPE Member

Stiff Member

Here For The Long Haul!

Super OPE Member

Here For The Long Haul!

Free Range Human in a Tax Farm

Here For The Long Haul!

Here For The Long Haul!

Here For The Long Haul!

Pinnacle OPE Member

Pinnacle OPE Member

Here For The Long Haul!

Pinnacle OPE Member

Axes never run out of Gas

Similar threads