High Quality Chainsaw Bars Husqvarna Toys

Oh dear, friend with a Craftsman saw

Duane(Pa)

It's the chain...
GoldMember
Local time
3:57 AM
User ID
325
Joined
Dec 30, 2015
Messages
4,680
Reaction score
23,766
Location
Centre County
Country flag
Schteel doesn't use this to my knowledge.
 

dougand3

Super OPE Member
Local time
2:57 AM
User ID
66
Joined
Dec 23, 2015
Messages
264
Reaction score
539
Location
North Alabama
Country flag
Yes, that's the broken fuel supply line that goes in hole under H-L screws. Pickup at end of that line in tank. And the other end attaches to empty nipple on fuel pump side. I hate the tiny .08" fuel supply line and drill that hole with 11/64" bit and use 3/32" for all 3 lines.
 

Duane(Pa)

It's the chain...
GoldMember
Local time
3:57 AM
User ID
325
Joined
Dec 30, 2015
Messages
4,680
Reaction score
23,766
Location
Centre County
Country flag
Yes, that's the broken fuel supply line that goes in hole under H-L screws. Pickup at end of that line in tank. And the other end attaches to empty nipple on fuel pump side. I hate the tiny .08" fuel supply line and drill that hole with 11/64" bit and use 3/32" for all 3 lines.
Thank you very much! Will the bigger line still fit that nipple?
 

dougand3

Super OPE Member
Local time
2:57 AM
User ID
66
Joined
Dec 23, 2015
Messages
264
Reaction score
539
Location
North Alabama
Country flag
If you're lucky, fuel lines and pickup may do it. Looking at those lines, diaphragms may not be flexible enough. Should be K10-WAT kit. Or a new WT-89 or WT-324 clone carb is ~$9 online.
 

Onan18

OPE Sponsor
GoldMember
Local time
3:57 AM
User ID
344
Joined
Dec 30, 2015
Messages
4,444
Reaction score
24,735
Location
Georgia
Country flag
72730-4d10e290feb21c0f85be65135d341607.jpg


I would like to have one of these "Crapsman" saws. :D
 

B440

Well-Known OPE Member
Local time
3:57 AM
User ID
4963
Joined
Jan 4, 2018
Messages
98
Reaction score
249
Location
Thompson, CT
Country flag
If you run across any of these crapsmans send them my way please.View attachment 125055
Mmmkay thanks bye.

My coworker sent me a pic of a Willow tree he cut down. I asked what type of saw he used. He responded with, "A 20 inch saw." And I immediately knew he was using a Craftsman..... :D
 

Dub11

Saw R skeery
GoldMember
Local time
2:57 AM
User ID
2014
Joined
Oct 21, 2016
Messages
34,438
Reaction score
146,038
Location
Kansas
Country flag
My coworker sent me a pic of a Willow tree he cut down. I asked what type of saw he used. He responded with, "A 20 inch saw." And I immediately knew he was using a Craftsman..... :D

Go confiscate that from him asap.
 
Top