- Local time
- 7:26 AM
- User ID
- 319
- Joined
- Dec 29, 2015
- Messages
- 9,357
- Reaction score
- 61,533
- Location
- Strong Island NY
Finally finished this months 12 of 12’s run. Time to play saws a bit.
Finally getting to @72thing hybrid build. This will be a real time build, so bear with me.
The jug porting is nearly done. I machined 3 at once a while back. Final squish setting happens for me on the final saw. All else takes place on my builder cases.
I found that, at least in my case, my 044 Case was .003 tighter than my 046 Case.
Here’s the jug being machined. Band cut by lathe
Finally getting to @72thing hybrid build. This will be a real time build, so bear with me.
The jug porting is nearly done. I machined 3 at once a while back. Final squish setting happens for me on the final saw. All else takes place on my builder cases.
I found that, at least in my case, my 044 Case was .003 tighter than my 046 Case.
Here’s the jug being machined. Band cut by lathe