WANTED Dolmar 120 SI (1st gen) Muffler, oil/fuel caps, & Air Filter Cover

vw_motorsports said:

I'm also looking for an early 120Super muffler, I had one years ago with the piped outlet. Loved the sounds it made. I have a 6800i with standard baffled muffler outlet now and it sounds nothing like the 120Super with that the piped muffler. It's the #1 muffler above

Click to expand...

PogoInTheWoods said:

That won't last long. I'm surprised it's still listed. Good price, too. Would pick it up in a heartbeat if this saw didn't also need a new bar and chain. Would unfortunately take the budget way beyond the scope of the project.

But thanks for the heads up!

Click to expand...

PogoInTheWoods said:

20" 3/8 .050. Shopping for a Sachs - Dolmar or Dolmar labeled bar, preferably with a replaceable tip with 5 or 6 rivet sprocket. A couple nice dolmar bars on Ebay but they're D009's and I'm pretty sure I need a K095 mount.

Click to expand...

how57 said:

How long of a bar you looking for and what pitch?

Click to expand...

PogoInTheWoods said:

Appears as though adapting a D009 mount isn't a very practical option.

Decided to salvage the original bar. Was a real mess but the rails were straight. Took some time using one of the Pferd rail dressing tools and it turned out real nice. Sprocket was trash and I found one (Windsor 5 rivet) on Ebay. And I gotta say, they used some serious rivets back when this bar was made. Took me a half hour of drilling and punching to get em out. I did find an Oregon Pro Lite 20".325 .050 in Dolmar colors and K095 mount and am considering swapping the rim to a .325 for it, but I also found a set of Dolmar stencils I could use to paint the original bar. And the Pro Lite bars are pretty wimpy compared to the original Windsor, so...

Btw, I'll take you up on those bucking spike patterns, How. Can't give the saw back to the guy with no dawgs! And do you have any pics of the modified Stihl dawg? May be an easier initial option since I don't have a plasma cutter handy, though I'm pretty sure I could get a set cut around here somewhere.

Click to expand...

how57 said:

It sounded good. LOL. I scratched my head on that one too. As far as dogs. I cut them out of a table saw blade with a plasma cutter. I have also used a inner dog off a Stihl 046. You have to modify it slightly but it will work. If you need a template to cut a set let me know.

Click to expand...