High Quality Chainsaw Bars Husqvarna Toys

ms 461 woods port race thing

Deets066

AKA Deetsey
Local time
1:31 AM
User ID
290
Joined
Dec 28, 2015
Messages
15,435
Reaction score
73,471
Location
Illinois
Country flag
I think the open end of the electrode of sparkplug is facing the clean part of chamber.


I would try to use some play doe, and shove in the transfers, remove and compare side to side. Looking for differences. I'm not sure what would keep the play doe from sticking unless a film of oil/ wd40 is used. Like stated before, might be the end results of the cutter used.


Just my thoughts.
Good points Joey
 

Stihlbro

Pinnacle OPE Member
Local time
1:31 AM
User ID
310
Joined
Dec 29, 2015
Messages
1,098
Reaction score
4,799
Location
Virginia
One other thought, if looking a piston wash, if both sides are even then that tells me both sides are equal. So the fresh charge is possible meeting in the middle? So that raises the question of what is happening when that takes place. Is the flow aimed and merging together?
 

Deets066

AKA Deetsey
Local time
1:31 AM
User ID
290
Joined
Dec 28, 2015
Messages
15,435
Reaction score
73,471
Location
Illinois
Country flag
One other thought, if looking a piston wash, if both sides are even then that tells me both sides are equal. So the fresh charge is possible meeting in the middle? So that raises the question of what is happening when that takes place. Is the flow aimed and merging together?
Hopefully it's meeting at the cylinder wall and going up
 
Top