ms 461 woods port race thing

cus_deluxe · Jan 14, 2018

Im sure pto side is warmer, but whether or not its significant enough to affect combustion? The further you go toward the center of the heatsink (cylinder) the more constant the temp will be. Outermost point of fins on eah side will be the highest temp difference.

tree monkey · Jan 14, 2018

had to go put wood in the stove again, it's another nice Wisconsin winter day

26238998_10156868947923238_626786729835651319_n[1].jpg

stihl livin · Jan 14, 2018

tree monkey said:
Julian is not coming today, something about losing his nuts again.

Rumor is he left them at your shop

tree monkey · Jan 14, 2018

paragonbuilder said:
Woohoo! I won! Lol
Is this a new piston? Or modified your primary transfer piston ?

Sent from my iPhone using Tapatalk

3 deg advance primary

tree monkey · Jan 14, 2018

stihl livin said:
Rumor is he left them at your shop

if I find them first, i'll give em a good kick

Keith Gandy · Jan 14, 2018

tree monkey said:
if I find them first, i'll give em a good kick

Redbull661 · Jan 14, 2018

1. you guys need to stop. He needs to sleep. Scott damnit. Go to bed!!!

2. I'm going down tomorrow bringing timing keys to try. and a better camera. Today I'm watching football with my brother and his new sh*t machine...err kid.

3. Someone asked about oil/gas a few pages back ..I gave him schaeffers 7000 32:1 91 eth free.

tree monkey · Jan 14, 2018

I moved my bed out into the shop. now I can work on saws in my sleep

MustangMike · Jan 14, 2018

And the wood chips provide addl insulation to your bed!!!

paragonbuilder · Jan 14, 2018

XP_Slinger said:
Looking forward to seeing what this slant yields. Apologize for post regarding slanting down, thought you were talking about changing roof angles in the port.

No need to apologize! That’s just a whole other angle to explore...
Pun intended!

Sent from my iPhone using Tapatalk

Keith Gandy · Jan 14, 2018

cus_deluxe · Jan 14, 2018

For the uninitiated (me), what should be the takeaway from these two graphics keith?

Keith Gandy · Jan 14, 2018

cus_deluxe said:
For the uninitiated (me), what should be the takeaway from these two graphics keith?

What we were discussing previously. About a 200° difference from one side to the other from what Im seeing. That was a lab study of a 2 strokes internal temps

cus_deluxe · Jan 14, 2018

i guess im havin a hard time seeing exactly where those arrows are goin and how stuff is laid out. the first one i dont understand at all haha.

P.M.P. · Jan 14, 2018

cus_deluxe said:
i guess im havin a hard time seeing exactly where those arrows are goin and how stuff is laid out. the first one i dont understand at all haha.

I'm with yea there man it must be our location

p61 western · Jan 14, 2018

P.M.P. said:
I'm with yea there man it must be our water

fixed

P.M.P. · Jan 14, 2018

Redbull661 said:
1. you guys need to stop. He needs to sleep. Scott damnit. Go to bed!!!

tree monkey · Jan 14, 2018

dislike button

drf256 · Jan 14, 2018

tree monkey said:
View attachment 106820

dan wins choice on the next piston to test.

This would be my pick. Open primaries faster.

drf256 · Jan 14, 2018

I’d like to see them open near same time, or the secondaries 1* earlier. The bigger primaries will flow and the angled roof secondaries lift the primary charge upward.

ms 461 woods port race thing

terms of service violator

Mastermind Approved!

Do the Dallas

Mastermind Approved!

Mastermind Approved!

Maxima K2 40:1 87 Pump Gas

661 hoarder (BlueBallz)

Mastermind Approved!

Mastermind Approved!

Mastermind Approved!

Maxima K2 40:1 87 Pump Gas

terms of service violator

Maxima K2 40:1 87 Pump Gas

terms of service violator

Stiff Member

Ol Mudflap

Stiff Member

Mastermind Approved!

Dr. Richard Cranium

Dr. Richard Cranium

Similar threads