Philbert
Chainsaw Enthusiast
- Local time
- 12:52 PM
- User ID
- 737
- Joined
- Jan 30, 2016
- Messages
- 4,438
- Reaction score
- 17,927
- Location
- East Dakota
I bought a 'lot' of Tsumura RSN bar nose tips / sprockets to fit a saw which I no longer have.
These tips were advertised as 'New Old Stock' (NOS), still attached to the the cut off bar ends (the guy wanted the tail mounting portion of the bars for a product he manufactures), and with some cosmetic defects, but never run. I pressed out the tips, cleaned them up, checked for free movement, but no longer need them.
The markings are hard to read due to light stamping:
TSUMURA
P/N 48 PV 84
3/8 050 058
3 Rivet mount pattern with 6 rivet sprocket. *These are the older version of the 48 FV 84 part with the 4 rivet sprocket. Tsumura says that they are interchangeable. Include mounting rivets.
$8 each, or 2 for $15, plus shipping.
Philbert
These tips were advertised as 'New Old Stock' (NOS), still attached to the the cut off bar ends (the guy wanted the tail mounting portion of the bars for a product he manufactures), and with some cosmetic defects, but never run. I pressed out the tips, cleaned them up, checked for free movement, but no longer need them.
The markings are hard to read due to light stamping:
TSUMURA
P/N 48 PV 84
3/8 050 058
3 Rivet mount pattern with 6 rivet sprocket. *These are the older version of the 48 FV 84 part with the 4 rivet sprocket. Tsumura says that they are interchangeable. Include mounting rivets.
$8 each, or 2 for $15, plus shipping.
Philbert
Last edited: