Stihl handlebar tubing

Milkman31 · Jan 10, 2016

I had this thread on the other site so I thought I'd bring it here to. This is the Handel from my 660 that needed new tubing. I got the tubing from the stihl dealer. I tried to push it on and that's not going to happen! I ask around and not much information on how to do it was found just to use air. So I took the Handel and removed all the old tubing and lightly sanded the bar. I looked around the shop and found an old valve stem to be able to hook it to the air hose. I started with the regulator set at 30psi and 30psi is nowhere enough. I moved to 80psi and now we're talking. To install the tubing I start with no air. Apply some oil or dish soap to the bar and slide the tubing on as far as you can. then with one hand hold on to the forward end of the tubing tight to trap the air and apply air and slide it all the way around. If you let go lol befor you turn off the air repeat the above!!! I hope this may help someone. If you have another method share it. In all it took me 30min from start to finish.

Tree my cur

mdavlee · Jan 10, 2016

Pictures no worky for me

psuiewalsh · Jan 10, 2016

Very nice. Thanks for bringing it back up. There was mention of the heat shrink too before. Can't remember if it was 7/8" http://buyheatshrink.com/heatshrinktubing/3-1-heavy-wall-polyolefin.php#B

Milkman31 · Jan 10, 2016

mdavlee said:
Pictures no worky for me

Yeah there is something going on with the pix on here.

psuiewalsh · Jan 10, 2016

Pics look fine on my laptop.

mdavlee · Jan 10, 2016

I'm on the computer. I'll check tapatalk on the phone.

Milkman31 · Jan 10, 2016

psuiewalsh said:
Pics look fine on my laptop.

Is just moble users!

mdavlee · Jan 10, 2016

Tapatalk doesn't show them either. Weird.

Mastermind · Jan 10, 2016

We should have the tech guy here tomorrow to fix em.

I do it with air too Milkman.

We've done a bunch of em, and gotten pretty good at it.

idiotwithasaw · Jan 11, 2016

Is the tubing fairly priced. And do both stihl and husky carry it?

Tractorsaw1 · Jan 11, 2016

Anyone using the shrink wrap types, thinking about doing 1 in red

psuiewalsh · Jan 11, 2016

Dolmar did red. I have not used. There is a thread on another site

Sent from my C771 using Tapatalk 2

psuiewalsh · Jan 11, 2016

https://www.google.com/search?q=dol...T828iM%2C_&usg=__TfgBxPN4EC5b9h2eX2B07TzSMac=

Tractorsaw1 · Jan 11, 2016

That's pretty much the saw I noticed & thought that would look good on my 7900 red top.

beaglebriar · Jan 11, 2016

Can't see the pics at the moment but I understand the method as I use it to install and remove M/C, ATV grips. The only thing I would ad is that silicone spray will help as well. I use it to install fuel line and pretty much anything rubber. You would think that it would leave a slick surface but it really doesn't.

Canadian farm boy · Jan 11, 2016

I used to play with street bike back in the day. When we installed new grips we would use hairspray. It would lube the bar for sliding the grip on and once it dried it effectively glued the grip onto the handlebar.

I don't know how well this would work for installing the handle bar tubing on a saw but might be worth a shot.

Milkman31 · Jan 11, 2016

idiotwithasaw said:
Is the tubing fairly priced. And do both stihl and husky carry it?

I got mine at the Stihl shop. It had been ordered by accident and been on the shelf for a while. They made me a deal that I couldn't refuse.

skippy · Jan 16, 2016

Thanks buddy

drf256 · Jan 17, 2016

What's the minimum waste amount one can leave on a piece for one bar? 6"?

I need one piece for an 028 bar if someone feels like selling me a piece.

Mastermind · Jan 17, 2016

Just send me the bar.

It's easier to install and then cut.

Stihl handlebar tubing

Pinnacle OPE Member

Hillbilly grinder

Basement Bodging

Pinnacle OPE Member

Basement Bodging

Hillbilly grinder

Pinnacle OPE Member

Hillbilly grinder

Chief Cat Herder

Super OPE Member

Super OPE Member

Basement Bodging

Basement Bodging

Super OPE Member

The Peanut Gallery

“Normal” people scare me.

Pinnacle OPE Member

Husqvarnas Sawyer

Dr. Richard Cranium

Chief Cat Herder

Similar threads