Jake Dykstra
Super OPE Member
- Local time
- 2:39 PM
- User ID
- 7947
- Joined
- Nov 25, 2018
- Messages
- 113
- Reaction score
- 252
- Location
- NW Washington
Looking for a decent 56mm cylinder for a 056 that a friend is working on.
Thanks
Thanks
WANTED Stihl 056 magnum cylinder
- Thread starter Jake Dykstra
- Start date
Junk Meister
Pinnacle OPE Member
- Local time
- 4:39 PM
- User ID
- 1674
- Joined
- Aug 10, 2016
- Messages
- 816
- Reaction score
- 2,265
- Location
- Nebraska
To the OP and other readersHave several 54s but no 56s
The 056 mm cylinders don't interchange with the 52/54mm cylinders.
If the serial # is 9 digits and starts 114 xxx xxx or higher that case will need a 56 mm cylinder ...
I am use to making mistakes but I am sure enough to stick my neck out on this post.
Stihlalltheway
Super OPE Member
- Local time
- 4:39 PM
- User ID
- 15645
- Joined
- Feb 6, 2021
- Messages
- 125
- Reaction score
- 451
- Location
- Minnesota
It can be done. I “machined” (read: angle grinder) a piston and drilled out the holes on a cylinder to make a 56mm p/c work on a 045 case. I wouldn’t recommend my way, but the saw does still run and it wasn’t the cleanest job of all time.
Junk Meister
Pinnacle OPE Member
- Local time
- 4:39 PM
- User ID
- 1674
- Joined
- Aug 10, 2016
- Messages
- 816
- Reaction score
- 2,265
- Location
- Nebraska
I have read of putting 066 cylinders on a Magnum case , I guess it comes down to the definition of interchange.
I can Identify with the right angle grinder.
I can Identify with the right angle grinder.
