Recent content by sidis8

Hey guys Anybody got a 661 pto case half they don't need any more ?

Yes it does, I'll post a few pics once I get back. Anybody know how far they're supposed to be driven in ? From looking at the pics on the first page, the seal driver goes past where the pics show.

Little off topic but how far is the oil seal supposed to be driven in on the flywheel side ? I picked up the husqvarna seal installation tool and put the seal in. But it seems like the tool can drive the seal in deeper, way past the shoulder. Up to this point I always used a socket to tap the...

Hey guys Hope everybody's having a good day. So I was doing a vac and pressure test on a 372 I recently put together. Wouldn't hold both. I get the old trusty soap and water and find the culprit, the impulse metal fitting that goes directly into the crankcase. It's leaking all around right...

One of my 201s uses this throttle rod https://www.lsengineers.co.uk/throttle-rod-for-stihl-ms201t-1145-182-1500.html And the other one uses the one u posted above.

I ran into the same problem when reassembling mine, lost the original part (the one I mentioned above) and got a spare from the dealer, the same part you posted in the pic above. Took me a while to make it work, the original part was bent differently but the new one worked also. The loop goes...

Missing This Part number 1145 182 1503

Hey guys Had a quick question, what's the history on the 372 ? Was it a different cc saw years back and it was upgraded to a bigger size ?

I think I'm gonna stop by the small local airport and see if I can get some of that ethanol free gas.

I didn't use any high pressure air on it. Is there a good way to test the carb ?

So I messed around with the carb when I got home, nothing made it work. Put in a new walbro and she fired right up, no problem. Anybody have any ideas as why the other carb would fail like that ? It was brand new when rebuilt.

Hey guys I recently bought a 201tc crank case and rebuild it. Used a am 201t cylinder and piston. Stihl actually makes a part kit that has a adjustable carburetor, non m tronic ignition module and a flywheel for the 201t. Here's the part number 1145 007 1802 The best part it's only like...

Yh, pressure held at 8 and same on vac. Fuel filter is on and I pressure and vac tested the fuel line too, passed with no problem. Deff gonna put in a carb that works in there, just gotta make it through the work day lol. Thank you

I reset the carb to 1 on each. Still has no luck last night. Gonna try a new carb tonight after work. Messed around with the la screw too.

Good morning everyone, New to the forum here. Learning a lot, bunch of great stuff on here. So here's my problem. Got a 461 that was rebuilt recently. Everything was running fine , no problems at all. So I go to start it yesterday and it won't run. Full choke and half choke is fine but it...