High Quality Chainsaw Bars Husqvarna Toys

Recent content by Paul Noon

  1. P

    MS200T won't stop!

    OK I have found the kill wire from the coil, ( I never saw it as it was under the handle) it was shaved off level with the rubber grommet ! I pulled it and I reckon that with the female spade connector attached to the wire it should just do the job, Thanks once again for taking the time to take...
  2. P

    MS200T won't stop!

    Thank you so much for taking the time to take the pictures! I thought that there must be another wire to complete the link, I will check this out in the morning. (It's a quarter to one oclock in the morning here in. The U.K.)..
  3. P

    MS200T won't stop!

    Got the green and yellow one but no black one!!! Where does the black one come from??
  4. P

    MS200T won't stop!

    Can somebody tell me how many wires there are in the handle to stop the saw! On my saw there is just one which grounds to the casing and I don't understand how just one wire can stop the saw! The wire on mine is attached to spring 1 and when the switch is turned to 0 this wire touches the pin...
  5. P

    MS200T won't stop!

    I re-soldered the wire to the brass ring earthing clip that bolts to the mainframe!
  6. P

    MS200T won't stop!

    Is there any other reason why the saw won't stop other than this part??? 1129 440 4000, I ask because I have resoldered the wire and it seems fine, is the cam on the switch touching the spring? could the spring need opening out a touch??
  7. P

    MS200T won't stop!

    Hi There, I took the top handle apart today and I wiggled the grounding wire and it just pulled apart so it looks like the saw was not grounding when switching off, so tomorrow I will solder a new piece of earth wire on and see how we go!!
  8. P

    MS200T won't stop!

    Hi all, I have built my MS200T back up now and all seem great apart from the fact that it does not shut off when I flick the switch to 0 nothing happens!! I have to choke it to stop it, The earth wire connection under the front handle seems good! Is there anything else that I should be...
  9. P

    MS200T

    Hi, I have just had given a Stihl MS200T Arboristsit saw ! It's in poor unloved condition, I intend to resurrect this saw to its former glory, I am in need of the IpL and the service manual , I would be grateful if someone could help me out with them, Regards Paul..
  10. P

    Just joined and want to say Hi to all,,,,

    Think I might be getting CAD already!! I have just got hold of a Stihl MS200T but it's a non runner and needs work, So I am now looking for a service manual for this, so can someone help me out with this one, Thanks Paul.
  11. P

    Stihl MS181

    looking for a Service manual for the above saw! I have the owners manual but it does not show the juicy bits. Thanks for looking Paul.
  12. P

    Just joined and want to say Hi to all,,,,

    I do have a Stihl BG86C blower for cleaning up if that makes three LOL....
  13. P

    Just joined and want to say Hi to all,,,,

    Hi All, bought myself a Stihl MS181 before Christmas just for branching and general use, I have just rebuilt my Stihl 041AV which I use for the heavier stuff, anyway I am wanting a service manual for the 181 as being a retired engineer I like to know how things work, so if anyone can help me out...
Top