laslabjohn's latest activity
-
John was around 7-8 years ago when Tree monkey was figuring all this stuff out. Good to see he still remembers some of it 👍😁 -
laslabjohn replied to the thread HELP! 201 tcm.yes sir I did, also it has a new selenoid in it.
-
201c is likely no different than a 661c. They will run fine with just a manual carb installed as long as you keep the solenoid attached
-
laslabjohn replied to the thread HELP! 201 tcm.I just left the wiring where it was, put in a munual carb. so everything is the same but your carb isnt getting signal from selenoid on...
-
laslabjohn replied to the thread HELP! 201 tcm.Yes sir, If you think about it. Which is what I was using the manual carb for. trouble shoot. If the saw would have changed at all it...
-
Exactly, I recently rebuilt a 201 t c-m that had been dropped from a tree by a climber about 45 feet up and landed on a concrete...
-
laslabjohn replied to the thread HELP! 201 tcm.Yes sir I understand, but I wasnt doing it to see if it would run. I was doing to see if it had the same exact symptoms.
-
laslabjohn replied to the thread HELP! 201 tcm.I eliminated the selenoid by convering to standard carb and checking too see if it done the same, it did. wich told me it was a coil...
-
Looking for a coil for mtronic 201 1145 4703
-
laslabjohn replied to the thread HELP! 201 tcm.we I changed it to a standard carb. and Its going around the mtron, figured if it changed would be wiring harness, if it didnt would...
-
I went in and got them to put a 24 inch bar on both saws and decided on the 462. So now I have to live with leaking caps I guess. Lol...
-
laslabjohn replied to the thread HELP! 201 tcm.i changed plug, replaced lines, cylinder is clean. taking harness out and tracing wires
-
laslabjohn replied to the thread HELP! 201 tcm.yes will try that also
-
laslabjohn replied to the thread HELP! 201 tcm.i will tiday
-
laslabjohn replied to the thread HELP! 201 tcm.tree service saw.
