High Quality Chainsaw Bars Husqvarna Toys

Recent content by brox

  1. brox

    DL count. 7900 w 28" tsumura

    I run 92dl on a 7 pin
  2. brox

    SELLING Oregon 68JX .404 chains

    Three Oregon 68JX .404, square ground, chisel, skip chains. I got these in a package deal and dont have anything to run them. Brand new with minor wear from being in a box of parts. 1 x 96 DL 1 x 108 DL 1 x 123 DL The 123 DL chain has a preset with extra flashing? Not sure if this matters...
  3. brox

    Stihl 1125 (034/034S/036/360) Cylinder/Saw ID

    Inside of cylinder I asked about a couple pages back. Mahle, no decomp. Tore it all the way down and glad I did. Flywheel side bearing is shot. Both side have metal shields.
  4. brox

    Stihl 1125 (034/034S/036/360) Cylinder/Saw ID

    Thanks for the info! I saw the air dam on the 034S cover. My 034S is mint so I baby it, this one will take over heavy firewood duty so just going for up and running.
  5. brox

    Stihl 1125 (034/034S/036/360) Cylinder/Saw ID

    Thanks, Bigmac! I'll PM you.
  6. brox

    Stihl 1125 (034/034S/036/360) Cylinder/Saw ID

    Great thanks for help everyone!
  7. brox

    Stihl 1125 (034/034S/036/360) Cylinder/Saw ID

    Thanks, that's the plan! Cylinder should clean up fine. Need a piston and all covers.
  8. brox

    Stihl 1125 (034/034S/036/360) Cylinder/Saw ID

    It has a side tensioner. I'm not at home so cant take more pictures until this weekend. Here are some I have on phone. Serial number starts with a 2 but dont have the whole number with me. Something got into flywheel and broke a fin on side of cylinder and a piece of case where wires go...
  9. brox

    Stihl 1125 (034/034S/036/360) Cylinder/Saw ID

    I'm looking for help identifying a new parts saw I picked up. I think it's an 036 pro based on clear tank, 5mm recoil bolts and later 036 style muffler. Has the older non-compensating carb on it. They cylinder is throwing me off and doesn't match any pictures posted in this thread. Its a mahle...
  10. brox

    Todays snag

    Picked up a really clean 034 Super. More of a Husky fan but excited to get this into some wood.
  11. brox

    Are 346xp's still desired?

    01 = 2001. That's OE
  12. brox

    Husqvarna 285CD spark help

    I took out a couple screws (5 mm I think) and used a steering wheel style puller with longer screws threaded into the flywheel. I have had it off multiple times now with this method and it's worked well. The first time was by far the worst and sounded like a .22 when it let loose. I used a 1/4...
  13. brox

    261 to 262

    I converted one this spring and in my opinion of the 3 changes listed in ordered of biggest power bump were muffler mod, clutch and lastly piston. With the 2 shoe clutch mine would bog pretty easy. Totally different saw with the 3 shoe.
  14. brox

    Husqvarna 285CD spark help

    Thanks! I put a little gas in carb and it fired up but thats as far as I got. Any idea for what the compression should be? Cylinder and piston look good.
  15. brox

    Husqvarna 285CD spark help

    Thanks everyone for the replies and help. Just got done taking everything off and reassembling and now have spark! I didn't see anything obvious and don't think I did anything different than the last time couple tries. Kill switch isn't hooked up because I had to snip the connector off to...
Top