Recent content by bill saf

at 7:00 am it was -6 f with wind chill of -16 f

Merry Christmas every one!

nah the trailer had a cement retaining wall collapse on it and bent it. Ill straighten it out later this spring and do repairs I just picked it up supper cheap.

I managed to score two ash trees that a customer had taken down a lil more then the my trailer wanted to see lol but got it home now to finish bucking it to size and split.

Plowed for 20 years. Any thing after 36 hrs was blood money. we had 5 side walk crews with atv's with plows, hand shovel's, salt spreader's front end loaders, six wheeler dump's with 10'plows and salt, pickup's with 9'plows and salt and 8'plows plowed from 1978 til 1998 and bought salt by the...

pics would help with you getting good info. Are you planing on refinishing the floor?

Thank you Sir

Can any one tell me what the max pressure of the case is or should be when starting a saw? I know the seals new have a max of 10 or 11 psi. and what would you say is to much for the transfers? thanks Bill

when you had the carb apart look a the needle in the top of the carb where the cable is dose it have 3 spots at the top of the needle if so move it to the middle one. the way they come are set to lean to start. by moving to middle noch on needle will fatten it up will need readjust carb after...

@Terry Syd Idk if you have the stroke #s for 362/372 are all 36 mm or for the guys here in the states 1.417". From what (Hutzles web page the 272 piston is 123 grams) from (Metor) 272 is 40.5 mm tall and stock 372 is 42.5 mm tall have you seen any spit back from the carb with the 272 piston...

Thank you Wood doc and Dub 11. Ill have to get 2 loops of .325 .063 and 2 - 3/8 .063 for now and get 100' latter. thanks again Bill

any up dates on this chain? likes dislikes?

I have a 55R trimmer and that zama carb has a sweet spot to start ez. heres what I did to mine pull the screen out of the muffler pull the caps on carb and adjust the l after its running and comes up to temp fatten it up some. I hit the primmer on mine 2 times and start in 3-4 pulls wot. If I...