What's on your bench?

[kingOFgEEEks]

I did the HD wiring harness and halogen bulb upgrade to the ol Burban
Before
View attachment 198015 After.

View attachment 198016

Tell me more. I need this in my life.

 

[Czed]

My son's project 55. @Dub11

Done yet?

 

[Czed]

575 clean on the outside neglected on the inside
Got half a cup of water out of it
Sprocket and clutch bearing shot.
Got him 5 loops of upstart full chisel
He wanted. runs ok for a pregnant 455
I likes my 372s far betterer

 

[qurotro]

View attachment 198044

084 with milled muffler! DAMN.

 

[beaglebriar]

Done yet?

We're making progress. Squish and timing are pretty good without machine work. Waiting on a couple parts also

 

[Czed]

575 clean on the outside neglected on the inside
Got half a cup of water out of it
Sprocket and clutch bearing shot.
Got him 5 loops of upstart full chisel
He wanted.View attachment 198046 View attachment 198047 View attachment 198048runs ok for a pregnant 455
I likes my 372s far betterer

Damn rope broke when i tested compression trueblue 4.5

 

[Mkinslow]

While not on the bench, sent the day rebuilding the suspension on the wife's Mustang. On day I hope to have garage to work in.
View attachment 198043

I hear ya about a garage to work in Just did my wife Lincoln navigator ball joints in a gravel driveway last weekend

 

[Wolverine]

We're making progress. Squish and timing are pretty good without machine work. Waiting on a couple parts also

Thanks to a generous local forum dude, my son also learned on these saws. We eventually got a closed port cylinder saw so he swapped top ends to test the difference to the open version. Great saw to teach on.

 

[Dub11]

Tell me more. I need this in my life.

LMC truck sells the harness and the headlight housings and bulbs were off Amazon. If you order the harness snag a couple extra relays as they are a one off type item. Oh and get some adjuster screw assembles too. Mine had 2 for each light.

 

[beaglebriar]

LMC truck sells the harness and the headlight housings and bulbs were off Amazon. If you order the harness snag a couple extra relays as they are a one off type item. Oh and get some adjuster screw assembles too. Mine had 2 for each light.

I did that to the Jeep a couple weeks ago. Except a stuck with sealed beams. Definitely worth doing.

 

[beaglebriar]

Thanks to a generous local forum dude, my son also learned on these saws. We eventually got a closed port cylinder saw so he swapped top ends to test the difference to the open version. Great saw to teach on.

We put the carb and recoil on this one tonight mainly because I was curious how much compression it would have. It is RIDICULOUS!!![emoji23][emoji23]

We're waiting on a carb kit and muffler at the moment.

 

[Dub11]

I did that to the Jeep a couple weeks ago. Except a stuck with sealed beams. Definitely worth doing.

I was going to do the same but I found glass buckets for $10 and the bulbs came out to $3 when you bought them in a 5 pack.

Plus I can upgrade to LED lol

 

[Dub11]

We put the carb and recoil on this one tonight mainly because I was curious how much compression it would have. It is RIDICULOUS!!![emoji23][emoji23]

We're waiting on a carb kit and muffler at the moment.

I like the sound of this.

 

[beaglebriar]

I was going to do the same but I found glass buckets for $10 and the bulbs came out to $3 when you bought them in a 5 pack.

Plus I can upgrade to LED lol

Snow won't melt off the LED's. That little piece of info cured me of wanting them.

 

[beaglebriar]

I like the sound of this.

It feels like 200+

 

[p61 western]

Snow won't melt off the LED's. That little piece of info cured me of wanting them.

This lol. Better off going with a hid kit if you upgrade.

 

[Dub11]

Snow won't melt off the LED's. That little piece of info cured me of wanting them.

Yeah but it doesn't snow that often here.

 

[beaglebriar]

Yeah but it doesn't snow that often here.

Flatlander...

 

[Dub11]

Flatlander...

Mean and hurtful.

 

[markds2]

View attachment 198044

Is it still impossible to get a replacement muffler for the 084?