Fruecrue
certified hand catcher
- Local time
- 3:07 AM
- User ID
- 2417
- Joined
- Jan 4, 2017
- Messages
- 4,391
- Reaction score
- 21,691
- Location
- Alden NY
I was thinking that a data base of crank measurements (I know) would be useful.
When I decided to swap a Solo 681 crank into a Dolmar 7900, Randy and I measured and compared cranks (I know).
Could really open the door for some cool builds.
I’m not asking you to pull out your crank and measure it, simply measure it, if you’d like, next time you have it out (I know).
Here’s the original drawing I made for the Solo/ Dolmar swap and a blank that can be printed, reproduced, altered, etc.
When I decided to swap a Solo 681 crank into a Dolmar 7900, Randy and I measured and compared cranks (I know).
Could really open the door for some cool builds.
I’m not asking you to pull out your crank and measure it, simply measure it, if you’d like, next time you have it out (I know).
Here’s the original drawing I made for the Solo/ Dolmar swap and a blank that can be printed, reproduced, altered, etc.
Last edited: