High Quality Chainsaw Bars Husqvarna Toys

DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

old_sir_henry

Pinnacle OPE Member
Local time
9:10 PM
User ID
7826
Joined
Nov 9, 2018
Messages
821
Reaction score
3,465
Location
Germany in the vicinity of Dolmar City
Country flag
The 116Si & 120Si series started in '87. Evolved into the 6000 & 6800 in '95. Ended production in 2003 or so with only the 6000 being made.

And thus the 6000i & 6800i were the final incarnation of the basic layout of the Sachs-Dolmar 112 and 114, which were introduced way back in the late 1970s. Not quite the same construction but the basic layout was all the same throughout 25 years of production.
 

Wilhelm

Here For The Long Haul!
GoldMember
Local time
9:10 PM
User ID
1204
Joined
Apr 28, 2016
Messages
11,377
Reaction score
43,215
Location
Croatia
Country flag
WTF, why did I stop getting notification for this thread?! o_O

I make one post in the Echo thread and all goes to hell . . . :rolleyes:

What model is this, can one tell from crappy pictures:
dol01.jpg dol02.jpg dol03.jpg
dol04.jpg dol05.jpg

It is obviously a 1xx series model, but which one?
Local to Croatia, no point of You guys searching for the ad on eBay. ;)

EDIT/P.S.:
It is amazing how sellers advertise a saw as in perfect condition, but do not state any saw model designation nor are any decals left on the saw in question!
 

Wilhelm

Here For The Long Haul!
GoldMember
Local time
9:10 PM
User ID
1204
Joined
Apr 28, 2016
Messages
11,377
Reaction score
43,215
Location
Croatia
Country flag

old_sir_henry

Pinnacle OPE Member
Local time
9:10 PM
User ID
7826
Joined
Nov 9, 2018
Messages
821
Reaction score
3,465
Location
Germany in the vicinity of Dolmar City
Country flag
Seller is asking for 270€ (plus shipping)

That sounds like a reasonable price if the saw is in good condition (assuming it
really is a 143).
Here in Germany you'll hardly get one for that amount, however
shipping will change the picture.
Would be interesting if I didn't already own a 143
 

old_sir_henry

Pinnacle OPE Member
Local time
9:10 PM
User ID
7826
Joined
Nov 9, 2018
Messages
821
Reaction score
3,465
Location
Germany in the vicinity of Dolmar City
Country flag
Very Interesting to see this Saw , I’ve seen a few blue Makita 309 power cutters
But never a 120

I have mailed some questions about my blue Dolmar 120 si to a guy I dealt with previously and know he's working at Dolmar / Makita Service in Hamburg.
See if he can shed some light on this mysterious saw, although I'm doubtful. Dolmar/Makita has no reputation for excellence in maintaining a covering archive though...
Answer, if any is to be expected as early as next year. I'll keep you informed.
 

ajschainsaws

Axes never run out of Gas
GoldMember
Local time
8:10 PM
User ID
685
Joined
Jan 26, 2016
Messages
7,822
Reaction score
37,483
Location
South west UK
Country flag
I have mailed some questions about my blue Dolmar 120 si to a guy I dealt with previously and know he's working at Dolmar / Makita Service in Hamburg.
See if he can shed some light on this mysterious saw, although I'm doubtful. Dolmar/Makita has no reputation for excellence in maintaining a covering archive though...
Answer, if any is to be expected as early as next year. I'll keep you informed.

It looks a similar situation too solo I’ve seen one later Rex and a couple of supers
That where yellow blue and had a red starter recoil about the same time
The 70 was launched I gotta feeling a bit of experimenting went on in germany
 

how57

It’s a city! Not a smoke!
Local time
1:10 PM
User ID
1147
Joined
Apr 11, 2016
Messages
2,760
Reaction score
13,640
Location
Weed Ca.
Country flag
Looking for a 28” 3/8 .050 bar with Sachs Dolmar on it. Going on a 120si. I have an add up on the boards. Do they exist?
 

old_sir_henry

Pinnacle OPE Member
Local time
9:10 PM
User ID
7826
Joined
Nov 9, 2018
Messages
821
Reaction score
3,465
Location
Germany in the vicinity of Dolmar City
Country flag
Looking for a 28” 3/8 .050 bar with Sachs Dolmar on it. Going on a 120si. I have an add up on the boards. Do they exist?
Probably not as factory supply. Longest bar for 120si, that is with small K095 mount was 21", there are perhaps 24" original bars available.
But I have seen aftermarket bars with "SACHS DOLMAR" printed on them but can't name a source.
 

how57

It’s a city! Not a smoke!
Local time
1:10 PM
User ID
1147
Joined
Apr 11, 2016
Messages
2,760
Reaction score
13,640
Location
Weed Ca.
Country flag
Probably not as factory supply. Longest bar for 120si, that is with small K095 mount was 21", there are perhaps 24" original bars available.
But I have seen aftermarket bars with "SACHS DOLMAR" printed on them but can't name a source.
You’re right on the manufacturers bar length. For got about that. I think I’m looking for something that doesn’t even is available. I might be able to find a Windsor bar and make one.
 
Top