not so pros

[huskihl]

Red armor

Idk. Seems like a lot of guys like red armor around here. But I've used lots of the cheap Walmart stuff in dirt bikes four wheelers and boats. A lot of guys bash the stuff just because it's cheap

 

[Czed]

Idk. Seems like a lot of guys like red armor around here. But I've used lots of the cheap Walmart stuff in dirt bikes four wheelers and boats. A lot of guys bash the stuff just because it's cheap

I'd still be running valvoline quarts of 2 cycle served us from the 70s till the 2000s

 

[Czed]

If it's the old black brass push in switch you will need to drill a hole for a grounding screw to install a new style switch, which is all that's available now, unless you can find a used one. Pretty easy conversion though.

I got an old one somewhere here
Found a echo toggle switch
That would be snazzy

 

[Sty57]

Idk. Seems like a lot of guys like red armor around here. But I've used lots of the cheap Walmart stuff in dirt bikes four wheelers and boats. A lot of guys bash the stuff just because it's cheap

I used Phillips 66 injex in my sleds for a lot of years.
I used to see it everywhere, but I don't anymore.
I don't know if they even make it anymore.

 

[Czed]

Fire's on changing wheel bearings in
A polaris 500 utv and the rear actuator is stuck trying to free it .
Friend got me a pile of metric fasteners
Excactly like the 2 series recoil and top cover take.

 

[huskihl]

I used Phillips 66 injex in my sleds for a lot of years.
I used to see it everywhere, but I don't anymore.
I don't know if they even make it anymore.

They have it either in northern Minnesota or canuck tire. We needed some for the boat and picked some up. Nuthin blowed up

 

[Sty57]

They have it either in northern Minnesota or canuck tire. We needed some for the boat and picked some up. Nuthin blowed up

I can't believe that!
The way some people talk. If you'd even sit a odd oil next to something. It would be seized in a few minutes.
Snowmobile and dirt bike forums are 100x times worse.

 

[Dub11]

Nice song.....

wtf not one nip slip! Bs I tell ya.

I got an old one somewhere here
Found a echo toggle switch
That would be snazzy

What out them Echo parts are sharp

 

[GCJenks204]

Quick stop with E for supper at Rotten Ronnie’s. Momma is going out for dinner and the theatre with one of her girl friends.

 

[p61 western]

Good evening fellas.

 

[hoskvarna]

Quick stop with E for supper at Rotten Ronnie’s. Momma is going out for dinner and the theatre with one of her girl friends.

And what is Rotten Ronnie’s Gary [emoji54]


Sent from Hoskey Hills

 

[Stihl working Hard]

Doing good so far. How are you doing Todd?

Not bad for a Saturday wifey in the shops Iam in the men’s lounge in the mall

 

[Stihl working Hard]

Good evening fellas.

Good evening Mike

 

[Stihl working Hard]

Done runs great
new fuel line used a echo grommet on 5mm fuel line.
started second pull didn't touch the carb
Suprised me the old fuel line was jelly.View attachment 153660
New rim sprocket and chisel chain.
Bastard likes it.View attachment 153659
Starter ropes only a few inches long.
That's next and a new kill switch.

Good evening Dave nice saw cat looks pretty chilled out there

 

[Stihl working Hard]

Quitting time gents here in a few mins...ready to get off this damn concrete!

Good evening Jason hope your week went well

 

[Czed]

Good evening guy's

 

[Stihl working Hard]

Good evening OPE hope everyone had a great day today

 

[Czed]

 

[GCJenks204]

And what is Rotten Ronnie’s Gary [emoji54]


Sent from Hoskey Hills

McDonalds...

 

[Dub11]

What the duce?

https://www.wibw.com/content/news/6...-from-Northern-California-farm-502201591.html