IEL-Pioneer thread

[p61 western]

Hi All
Any Beaver Experts? I have Ser # 1232 that i am trying to bring back to life.
I need a reed vale for sure.A Manual would be nice.
It was seized i have it all apart now,the reed valve kept enough of the water out so the bearings are good.Managed to get the piston out with out damaging it or the rings.The cylinder and reed valve plate have some pitting.
Anyone have a stash of parts for these,or parts for the IEL AB may be the same.
Thanks Thomas

@ray benson might be able to help with manuals. @Basher might be able to steer you in the right direction for parts for the older saws like that.

 

[ray benson]

Wow, super old saw. Acres says it is 1946- 1948
http://www.acresinternet.com/cscc.n...1ce8e20e3f00034c88256af80018dd8b?OpenDocument
Sorry no manuals for a Beaver but here is the operators/ ipl manual for the AB

 

[p61 western]

Wow, super old saw. Acres says it is 1946- 1948
http://www.acresinternet.com/cscc.n...1ce8e20e3f00034c88256af80018dd8b?OpenDocument
Sorry no manuals for a Beaver but here is the operators/ ipl manual for the AB

Thank you for the quick response Ray. When I'm back at home I might be able to dig something up.

 

[ray benson]

Chainsaw museum says 1944-1946
https://www.toolsofthetrade.net/photos/a-trip-to-the-chainsaw-museum

 

[Yukon Stihl]

Thanks Ray
I have one of those as well.similar,yet different.I got another for parts ser# 1456 but there are changes to the cylinder in that short run

 

[p61 western]

Thanks Ray
I have one of those as well.similar,yet different.I got another for parts ser# 1456 but there are changes to the cylinder in that short run

Here is a link to a lot of info. Hopefully some of it helps you out. https://www.mediafire.com/?cxxmbm1tjs422

 

[J. Loe]

Niiiiice.

 

[Yukon Stihl]

That will come in handy, Thanks

 

[Fishnuts2]

Can any of you guys tell me the initial low speed needle setting for a model 1074? Walbro carb.
Thx!


Sent from my iPhone using Tapatalk

 

[p61 western]

Can any of you guys tell me the initial low speed needle setting for a model 1074? Walbro carb.
Thx!


Sent from my iPhone using Tapatalk

Start at 1.25 turns and go from there.

 

[Fishnuts2]

Start at 1.25 turns and go from there.

Will do, Thanks!

 

[fossil]

There's a bit of sketchy info around on what happened to Pioneer back in the '80's. I've read a couple of spins on it but a look at this starting on page 14 gives a fair description of what happened.

 

[Yukon Stihl]

This old girl found a new home today.Missing a couple of original pieces but in pretty good shape otherwise.

 

[heimannm]

My recent acquisition




Mark

 

[p61 western]

My recent acquisition

View attachment 140811
View attachment 140812
View attachment 140813
Mark

Very nice it looks to be in great shape.

 

[Basher]

My recent acquisition

View attachment 140811
View attachment 140812
View attachment 140813
Mark

It`s yellow but not a McCulloch...

 

[DrewUth]

I recently traded for two Pioneers, a P41 and a 1200A. I got two 20" bars, both Pioneer brand. I really want to put a 24" on the P41 but I am having trouble figuring out what mount type I need. Can anyone help? Anyone got one laying around?

 

[p61 western]

I recently traded for two Pioneers, a P41 and a 1200A. I got two 20" bars, both Pioneer brand. I really want to put a 24" on the P41 but I am having trouble figuring out what mount type I need. Can anyone help? Anyone got one laying around?

It's a d007 mount, but a d009 can be made to fit by opening the slot a little bit. The oil hole will line up no problem. The p41 is a great saw.

 

[DrewUth]

Thanks! I was looking at D196 bars because it looked like they fit the Poulan 455/655 and I thought they might interchange. But this is much better information!

 

[p61 western]

Thanks! I was looking at D196 bars because it looked like they fit the Poulan 455/655 and I thought they might interchange. But this is much better information!

The d196 will work as well. The 455/655 is the same mount.