sfg.Foley
Super OPE Member
Hi There,
I was told that it would be nice to post something about the Echo - Shindaiwa 390 SX in this place.
2017 I bought a new light weight chainsaw because my Stihl MS201 got blow up. Because I hade some problem with the M-Tronic on this specific model, I dont wont to go with another 201. Husqvarna don't ve a pro 40 or 35ccm Saw since the 339 is gone.
So my buddy told me there is a new 40ccm Saw from Echo on the market. The 390 SX. In Germany the 390 SX is only available as a Shindaiwa. No difference accept the color. Because I'm totally Okay with my Echo 501 SX I decided to go with the 390.
My first toughs: Very small, looks similar to my 501 and very torque for a just 40ccm saw. But the chain and bar isnt right for it. It come stock with a 325 chain and 16" bar - I'm sure it will be better with a 15" and 3/8 Picco Chain.
So, there are 400 Kubikmeter to cut. Very smal spruce. So its the right size for this saw.
First try with a new bar and 3/8 Picco chain. Cuts a lot more better:
One thing I dont like is the Muffler Kat the saw ve. But for a few bucks you can buy a new muffler from the ECHO 501 that will fit plug any play and dont ve a Kat.
And, hier is a small video to see the power of this little beast:
Pros:
- high torqu for 40ccm
- very light
- feels solid
- metall handle
- starts always the first time
Cons
- bad AV system
- KAT
I was told that it would be nice to post something about the Echo - Shindaiwa 390 SX in this place.
2017 I bought a new light weight chainsaw because my Stihl MS201 got blow up. Because I hade some problem with the M-Tronic on this specific model, I dont wont to go with another 201. Husqvarna don't ve a pro 40 or 35ccm Saw since the 339 is gone.
So my buddy told me there is a new 40ccm Saw from Echo on the market. The 390 SX. In Germany the 390 SX is only available as a Shindaiwa. No difference accept the color. Because I'm totally Okay with my Echo 501 SX I decided to go with the 390.
My first toughs: Very small, looks similar to my 501 and very torque for a just 40ccm saw. But the chain and bar isnt right for it. It come stock with a 325 chain and 16" bar - I'm sure it will be better with a 15" and 3/8 Picco Chain.
So, there are 400 Kubikmeter to cut. Very smal spruce. So its the right size for this saw.
First try with a new bar and 3/8 Picco chain. Cuts a lot more better:
One thing I dont like is the Muffler Kat the saw ve. But for a few bucks you can buy a new muffler from the ECHO 501 that will fit plug any play and dont ve a Kat.
And, hier is a small video to see the power of this little beast:
Pros:
- high torqu for 40ccm
- very light
- feels solid
- metall handle
- starts always the first time
Cons
- bad AV system
- KAT