High Quality Chainsaw Bars Husqvarna Toys

The Swap Meet Thread

Lightning Performance

Here For The Long Haul!
Local time
11:23 AM
User ID
677
Joined
Jan 26, 2016
Messages
10,991
Reaction score
28,048
Location
East of Philly
They are few and a bit odd. Must be leftovers on mine with the flat top, HD and metal box. Very crappy carb inlet area on mine but lots of material there to smooth it out! It sounds way better than my 660. Decomp jug plugged when it came to me. Weird saw for sure.
Do you have any part numbers? Or IPL part number list for that white tank handle?
 

MG porting

Pinnacle OPE Member
Local time
8:23 AM
User ID
6543
Joined
Jun 28, 2018
Messages
2,400
Reaction score
6,829
Location
Wa
Country flag
ok, I due have an extra orange carb housing piece that screws to the top of the tank - so it doesn't need to be a complete tank
Here's the one I've got unfortunately it's not what you're looking for it's the see thru tank the non see thru is going to be a tuff one to find unfortunately but you may get lucky I'll keep a eye out and check to see if anyone I know who may have one like what you're looking for. IMG_20180812_145523.jpg IMG_20180812_145548.jpg
 

odin

100% noodle arms
Local time
10:23 AM
User ID
1108
Joined
Apr 1, 2016
Messages
207
Reaction score
604
Location
ks
Looking for an early Stihl 066/064 white fuel tank - I have a see thru tank to fit the same that has a seam repair I would like to trade. I am looking to die it black so need not be perfect, just no cracks, breaks, or massive scratches. I could also use an HD air filter cover & the carb cover plate with the snorkel slot for the same & clutch cover - I have a wj-48 carb & cash I could swap also for those. Thanks

I'm your Huckleberry...

Was hoping for some dinero for this one. Maybe we can work something out. Don't have a lot of time right now, I'll try to PM you this evening.






 

AlfA01

Mastermind Approved!
GoldMember
Local time
5:23 PM
User ID
5546
Joined
Mar 8, 2018
Messages
5,984
Reaction score
44,973
Location
Evia, Greece
Country flag
Guys, I’m looking for some small parts for SOLO 603. I need fuel cap and oil cap gaskets, or if someone knows what size O-ring that’ll fit.

I’m also looking for the carb adjuster surround grommet/guide.

If anyone knows where I can find these parts, it’s greatly appreciated.

I don’t have much to trade, other than green pieces of paper.
Sondre, do you have any part numbers? I found a dealer here that I can ask.
 

MG porting

Pinnacle OPE Member
Local time
8:23 AM
User ID
6543
Joined
Jun 28, 2018
Messages
2,400
Reaction score
6,829
Location
Wa
Country flag
I'm your Huckleberry...

Was hoping for some dinero for this one. Maybe we can work something out. Don't have a lot of time right now, I'll try to PM you this evening.






If he doesn't want to buy the hole thing I'll be interested in the case and crankshaft and brake system.
 

odin

100% noodle arms
Local time
10:23 AM
User ID
1108
Joined
Apr 1, 2016
Messages
207
Reaction score
604
Location
ks
If he doesn't want to buy the hole thing I'll be interested in the case and crankshaft and brake system.

FWIW, the rear AV mount on the PTO side is busted. If you look close you can see it in the pic of the underside. Crank is questionable as well. It's bound up a bit and I haven't bothered to figure out if it's just crud down there or what.

The rest of the see-able parts appear to be good. If that stinking case wasn't knackered, I'd be scrounging really, really hard to get an 064 running myself...
 

SOS Ridgerider

Muffler Modded Member
Staff member
GoldMember
Local time
11:23 AM
User ID
1222
Joined
Apr 30, 2016
Messages
2,479
Reaction score
14,728
Location
Central CT
Country flag
Sondre, do you have any part numbers? I found a dealer here that I can ask.
I did manage to find the gaskets on eBay. They’re already installed on the saw. It needed it. The old ones were like plastic.

The grommet is supposedly coming from Germany. I found it on a German site, and ordered it. They don’t ship outside the EU, so it’ll be sent to my address in Norway, and then I’ll have it sent here. Hopefully it’ll work out.

I do appreciate the offer to look up the parts, though, and there may be other things needed in the future. Maybe I can ask you if that happens?
 

MG porting

Pinnacle OPE Member
Local time
8:23 AM
User ID
6543
Joined
Jun 28, 2018
Messages
2,400
Reaction score
6,829
Location
Wa
Country flag
FWIW, the rear AV mount on the PTO side is busted. If you look close you can see it in the pic of the underside. Crank is questionable as well. It's bound up a bit and I haven't bothered to figure out if it's just crud down there or what.

The rest of the see-able parts appear to be good. If that stinking case wasn't knackered, I'd be scrounging really, really hard to get an 064 running myself...
I need all the spare parts that I can get for the 064s just in case something happens with mine it's nice to have some. Lol.
 

AlfA01

Mastermind Approved!
GoldMember
Local time
5:23 PM
User ID
5546
Joined
Mar 8, 2018
Messages
5,984
Reaction score
44,973
Location
Evia, Greece
Country flag
I did manage to find the gaskets on eBay. They’re already installed on the saw. It needed it. The old ones were like plastic.

The grommet is supposedly coming from Germany. I found it on a German site, and ordered it. They don’t ship outside the EU, so it’ll be sent to my address in Norway, and then I’ll have it sent here. Hopefully it’ll work out.

I do appreciate the offer to look up the parts, though, and there may be other things needed in the future. Maybe I can ask you if that happens?

I'm always here and if there is something odd that you can't get in the US, I can always try on my end.
 

GoBigBlue1984

Bluegrass Fart Knocker...
GoldMember
Local time
11:23 AM
User ID
450
Joined
Jan 8, 2016
Messages
1,411
Reaction score
5,235
Location
Kentucky
Country flag
Looking to buy or trade for a 357/359 muffler.
 

Likesaws

Super OPE Member
Local time
11:23 AM
User ID
660
Joined
Jan 24, 2016
Messages
324
Reaction score
971
Location
South west. Virginia
Country flag
Wanted a oil pump for a Stihl 044. Does not have to work need one to set bearing depth. Let me know.
Thanks
 

Tractorsaw1

Super OPE Member
Local time
10:23 AM
User ID
308
Joined
Dec 29, 2015
Messages
409
Reaction score
706
Location
SHOW ME MO
Country flag
Rod hooked me up on a tank - Still looking for: 066 poly flywheel coil & wires if decent, flat top HD air filter cover & carb plate with compensator slot - if you have arctic parts I am looking for those also. Lots to trade & $$$$ thanks
 

SOS Ridgerider

Muffler Modded Member
Staff member
GoldMember
Local time
11:23 AM
User ID
1222
Joined
Apr 30, 2016
Messages
2,479
Reaction score
14,728
Location
Central CT
Country flag
Looking for a flywheel for a 64xx-79xx for the burgundy 13,500 coil.
 
Last edited:
Top