Need a ms 210c engine. ..

[cobey]

I got a neighbors 210c
It needs a piston and cylinder,
I thought a 025 engine fit it
But nothing I find says that

 

[Dub11]

So what I have found is the the whole motor assembly ( crank and p/c ) will fit. The two motors have a different stroke. If you look on the HLS site they are all grouped together. I have a 021 that is going to get an AM 025 complete motor dropped in one of these days.

 

[cobey]

So what I have found is the the whole motor assembly ( crank and p/c ) will fit. The two motors have a different stroke. If you look on the HLS site they are all grouped together. I have a 021 that is going to get an AM 025 complete motor dropped in one of these days.

The only thing is it doesn't list it on the part just 023 and 025, I never went threw
A 210 so I didn't know if it would work.
I didn't want to work on this turd butt........
You know how it goes

 

[Dub11]

From what I have read the 021 is 40x28 mm 023 40x32mm and 025 is 42 or 42.5 by 32mm

That's why the 023 and 025 are grouped together.

I was told a complete 025 will be a perfect drop in.

 

[cobey]

From what I have read the 021 is 40x28 mm 023 40x32mm and 025 is 42 or 42.5 by 32mm

That's why the 023 and 025 are grouped together.

I was told a complete 025 will be a perfect drop in.

I might do that..... I just don't want extra
Parts I won't use

 

[Dub11]

I might do that..... I just don't want extra
Parts I won't use

Are you going oem or am

 

[Lightning Performance]

Had no clue about the stroke difference. Put a 210 in my dads hands years ago. He loves it. Said it screams. I was told it has a stamped cheap con rod.

 

[Lightning Performance]

Just read the other post. It makes sense now. Just like a 200 or 201 bottom wif a cheapy crank and rod.

 

[Lightning Performance]

So what I have found is the the whole motor assembly ( crank and p/c ) will fit. The two motors have a different stroke. If you look on the HLS site they are all grouped together. I have a 021 that is going to get an AM 025 complete motor dropped in one of these days.

Psst... get a 250 block if your going to keep it

 

[cobey]

Are you going oem or am

Whatever works, they may only use it one time before the fuel system drys up

 

[Dub11]

Whatever works, they may only use it one time before the fuel system drys up

https://www.googleadservices.com/pa...ahUKEwiTkcyVhsDaAhWtm-AKHXEeABsQwg8IHg&adurl=

 

[cobey]

I forgot Chad had told me this before,
I try to find out sure deals before getting
Parts.... I do put a few am parts
On 290 type stuff

 

[cobey]

https://www.googleadservices.com/pa...ahUKEwiTkcyVhsDaAhWtm-AKHXEeABsQwg8IHg&adurl=

I ordered this one

 

[Dub11]

I ordered this one

I have heard the wt-215 knock off carbs work well with them to.

 

[Lightning Performance]

I ordered this one

Are you going to open it or plug and play?

 

[cobey]

Are you going to open it or plug and play?

I always seal the bottom cap and
Let them dry overnight with spacers
Between the bolts and cap

 

[cobey]

Are you going to open it or plug and play?

I'l probably advance the timing, and do a muffler mod..... I want the customer
To think he has a beast

 

[Dub11]

Just read the other post. It makes sense now. Just like a 200 or 201 bottom wif a cheapy crank and rod.

Speaking of cheap cranks them Troy bilt string trimmers have the cheapest crank I have ever seen. It was like 3 pieces of stamped metal spot welded together lol.

 

[cobey]

Speaking of cheap cranks them blown troy bilt string trimmers have the cheapest crank I have ever seen. It was like 3 pieces of stamped metal spot welded together lol.

There are 2 blown up troy built
Weed eaters in the junk Shed

 

[Fruecrue]

I put one of these in a buddies ms210 a couple years ago, it still runs strong.

https://m.ebay.com/itm/42-5mm-Cylin...284979?hash=item568ccabf73:g:710AAOSwJ4hY-E4k