I'm thinking about building one, but it will be a couple of months until I order one, if I do.
I believe Walt built one. I know Matt built one
@Mattyo
He has a 5 segment series on YouTube under Matthew Olson.
From memory. I probably will forget some stuff.
Missing parts:
1) Screw for chain catcher
2) Spring and stiffiner for oil line
3) Muffler spacer NLA from Stihl but available on Ebay.
4) He also mentioned. Missing piece of rubber between carb and filter.
5) part of the chainbrake was there but defective.
6) Brake band pin missing. He made one.
Issues:
1) Flywheel rubbed on recoil till it wore in.
2) Had to inlarge bottom muffler holes. They didn't line up.
3) Inverted bevels on ports. Needed to be rebeveled.
4) Metal insert for intake was too loose. Sent wrong one.
5) One of the bearings had to be driven in farther. The one on the oil pump side.
6) Wrist pin was way to loose in piston. Be careful because the 038 kits they sent the wrong wrist pins on some.
I think that's it.
Sent from my LGLS775 using Tapatalk