High Quality Chainsaw Bars Husqvarna Toys

What oil is best? and what ratio?

huskyboy

Sorta a husqvarna guy...
Local time
1:30 PM
User ID
1352
Joined
May 30, 2016
Messages
10,025
Reaction score
43,448
Location
Ct
Country flag
Piston is beautiful in my 562 after countless tanks running 40:1 saber....oil all over the piston and little to no carbon buildup. Gonna stick with what works.
 

Keith Gandy

Maxima K2 40:1 87 Pump Gas
Local time
12:30 PM
User ID
341
Joined
Dec 30, 2015
Messages
6,207
Reaction score
16,189
Location
Provencal, Louisiana
Country flag
Piston is beautiful in my 562 after countless tanks running 40:1 saber....oil all over the piston and little to no carbon buildup. Gonna stick with what works.
Is it running rich? Should have some carbon on top of that piston? All Saber Ive used made carbon on top of the crown
 

Keith Gandy

Maxima K2 40:1 87 Pump Gas
Local time
12:30 PM
User ID
341
Joined
Dec 30, 2015
Messages
6,207
Reaction score
16,189
Location
Provencal, Louisiana
Country flag
Not any more than red armor that I ran in it previously. I do load the saw well and it wears 24” bar.
Thats odd. I hadnt seen many oils when the saw is tuned keep a clean piston top. This is my 346 with RA at 40to1 and its still rich1502016905312.jpg
 

andyshine77

Pinnacle OPE Member
Local time
1:30 PM
User ID
3830
Joined
Aug 17, 2017
Messages
1,254
Reaction score
5,629
Location
Cincinnati, OH
Country flag
Thats odd. I hadnt seen many oils when the saw is tuned keep a clean piston top. This is my 346 with RA at 40to1 and its still richView attachment 106452
That's about where I like to tune my saws, sure you will loose a tiny bit of power and use s little more fuel, but that's ok.[emoji6]

Sent from my LG-H871 using Tapatalk
 

Keith Gandy

Maxima K2 40:1 87 Pump Gas
Local time
12:30 PM
User ID
341
Joined
Dec 30, 2015
Messages
6,207
Reaction score
16,189
Location
Provencal, Louisiana
Country flag
That's about where I like to tune my saws, sure you will loose a tiny bit of power and use s little more fuel, but that's ok.[emoji6]

Sent from my LG-H871 using Tapatalk
Ya me too. Its at about 14700 right off 4 stroke and wears a 16" Cannon with PS chain for limbing. It would probably carbon on over if I loaded the 16" more
 

Keith Gandy

Maxima K2 40:1 87 Pump Gas
Local time
12:30 PM
User ID
341
Joined
Dec 30, 2015
Messages
6,207
Reaction score
16,189
Location
Provencal, Louisiana
Country flag
None my business. That saw will rip full 3/8 at 16. Why the pic o? I run 325 18 on mine. Both of them came w 3/8 rims on em.
The 3/8P is the quickest to me and smooth limbing. I had a gutted strato 241c with Stihl PS setup that was as fast and a few cuts faster than a ported 346 running .325
 
Top