Holiday Giving Thread

[Cracker Boy]

I just went back to page 20 and read through to the end. I don't see Jeremy in the thread at all. If he has interest in it he didn't say so publicly. If he has a 034 that needs it he should get with @Jon1212 on it.

Someone attempted to claim it as a K095 bar, might have been the confusion...

No worries its yours we were talking on phone about it no posts. We were both talking about how them old windsor sandviks are good cool bars and we would have claimed it, Him and i saw were it said he sent both pms assummed it was that bar that was spoken for gary cuz we talk and horse trade alot. Its just confusing is all.

 

[Cracker Boy]

I'm not sure what's so confusing? I wrote right on the bars which mount they were.

Were it said sent both pms we asumed that was it honestly no big deal.

 

[Mkinslow]

Come on guys let’s just push it to the side and roll on with the thread.

 

[Redfin]

I thought it was claimed.

You should pay closer attention, especially how you're just hovering over this thread looking for stuff.

No need to respond.

 

[mcginkleschmidt]

Since I switched over several years ago to using TruFuel 40:1 for my chainsaw, last year I offered a full bottle and a partial 3/4 full bottle of Amsoil Saber 100:1 Synthetic 2-cycle oil. This past summer I was changing the oil in my truck, I found another full unopened bottle of the same Amsoil Saber 2-cycle oil I didn't know I had. If anyone wants it with free shipping in the continental US, please PM me with your name, address and phone (phone needed for Fedex ground shipping label) and it will be yours. Gen qui, as Borat says.

 

[XP_Slinger]

I just thought of something to put on here, I'll post it when I get pics later.

 

[Jon1212]

Jon1212 : NOS Windsor MRA 660A9 tips, these are for the smaller Windsor RSN bars.(3)
NOS Oregon D176 Echo bar. 16" 3/8 050

Sty57 : tank & top cover for a 450xt.

brandonstclair20: Husqvarna 445 cylinder with piston
Mcculloch power Mac 380 cylinder and piston
Husqvarna 44 cylinder
Smaller Mcculloch cart motor cylinder

Marshy: Iron Age steel toe boots (uninsulated) made in US of A, size 14, 3E.

Johnmn bar 20 inch 3003 mount .325 .063

Matt Ellerbee : crasftman 1.9 top handle (non runner)

Drptrch : three chains, .325 .063 74dl’s. (18”)

kingOFgEEEks : Raisman 16" (60 DL) 3/8 .050 chain
Misc. smalls or parts off of Stihl 261 or Husky 570 carcasses

PA Dan : 042 / 048 Recoil (Please help with shipping)

Red 97: Box o' 351/346 project

moparnut88 Pferd file handles - a couple sizes and multiple available

T.Roller : Free slap fight and maybe a Mac 797

MKinslow Husqvarna 570XP cylinder, light transfer.

XP_Slinger 3/8, .058ga, 20", 72DL, K095 Mount bar

Acornhill Poulan 4000 starter pulley

huskihl 028. PM by 4pm Sunday 12/10

RIDE-RED 350r: 16" 3/8 Low Profile Oregon bar with chain. I believe it's K095 mount?? It fits on my old Husqvarna 35

@RIDE-RED 350r picture of the bar? I believe the 35 was made to take an A064 Frontier/Quadra/ EMAB mount.

 

[Jon1212]

I just thought of something to put on here, I'll post it when I get pics later.

Tease!!!

 

[Cracker Boy]

You should pay closer attention, especially how you're just hovering over this thread looking for stuff.

No need to respond.

Im laid up from an accident for 5 months with nothing but time on my hands. Ive had 3 surgerys fyi.i have also contributed and havnt claimed anything nor have claimed more then one gift either. Also myself and other members whom i deal with outside forum thought the same thing.i m honestly not looking for an argument either. Im hovering on many threads if thats what you call it.with all due respect. Thank you

 

[RIDE-RED 350r]

@RIDE-RED 350r picture of the bar? I believe the 35 was made to take an A064 Frontier/Quadra/ EMAB mount.

Comin' right up boss.

Pics were posted and Philbert offered some insight, but that was miles back in the thread

 

[Jon1212]

Comin' right up boss.

Pics were posted and Philbert offered some insight, but that was miles back in the threadView attachment 99909 View attachment 99910

Handy with the pictures.

Yes, A064 (last four of the Oregon code).

 

[RIDE-RED 350r]

They were still in my phone from when I snapped them the other day.

And looking at pic #2, you are spot on with the mount as I figured you would be. I never knew that part of the part number indicated bar mount. Thanks @Jon1212

(I'll go edit my post with the gift list)

 

[SOS Ridgerider]

I still have the 5 bottles of Woodland Pro Synthetic Oil up for grabs. It’s in the front of the thread somewhere. I’ve added it to the bottom of the list.
Still can’t ship until the second week of January.

Jon1212 : NOS Windsor MRA 660A9 tips, these are for the smaller Windsor RSN bars.(3)
NOS Oregon D176 Echo bar. 16" 3/8 050

Sty57 : tank & top cover for a 450xt.

brandonstclair20: Husqvarna 445 cylinder with piston
Mcculloch power Mac 380 cylinder and piston
Husqvarna 44 cylinder
Smaller Mcculloch cart motor cylinder

Marshy: Iron Age steel toe boots (uninsulated) made in US of A, size 14, 3E.

Johnmn bar 20 inch 3003 mount .325 .063

Matt Ellerbee : crasftman 1.9 top handle (non runner)

Drptrch : three chains, .325 .063 74dl’s. (18”)

kingOFgEEEks : Raisman 16" (60 DL) 3/8 .050 chain
Misc. smalls or parts off of Stihl 261 or Husky 570 carcasses

PA Dan : 042 / 048 Recoil (Please help with shipping)

Red 97: Box o' 351/346 project

moparnut88 Pferd file handles - a couple sizes and multiple available

T.Roller : Free slap fight and maybe a Mac 797

MKinslow Husqvarna 570XP cylinder, light transfer.

XP_Slinger 3/8, .058ga, 20", 72DL, K095 Mount bar

Acornhill Poulan 4000 starter pulley

huskihl 028. PM by 4pm Sunday 12/10

RIDE-RED 350r: 16" 3/8 Low Profile Oregon bar with chain. I believe it's K095 mount?? It fits on my old Husqvarna 35

SOS Ridgerider: 5 bottles of Woodland Pro Synthetic Oil

 

[jacob j.]

T.Roller : Free slap fight and maybe a Mac 797

You forgot to mention that the slap fight includes oven mitts.

 

[kingOFgEEEks]

Thanks everyone for jumping on the list update. It makes it easier to keep track of what has been claimed.

Merry Christmas, Happy Hanukkah, Happy Solstice, etc.

 

[p61 western]

You forgot to mention that the slap fight includes white oven mitts.

Fixed lol

 

[Jon1212]

Jon1212 : NOS Windsor MRA 660A9 tips, these are for the smaller Windsor RSN bars.(3)
NOS Oregon D176 Echo bar. 16" 3/8 050
New Oregon Powermatch K095 16" 3/8 .058 60DL.

Sty57 : tank & top cover for a 450xt.

brandonstclair20: Husqvarna 445 cylinder with piston
Mcculloch power Mac 380 cylinder and piston
Husqvarna 44 cylinder
Smaller Mcculloch cart motor cylinder

Marshy: Iron Age steel toe boots (uninsulated) made in US of A, size 14, 3E.

Johnmn bar 20 inch 3003 mount .325 .063

Matt Ellerbee : crasftman 1.9 top handle (non runner)

Drptrch : three chains, .325 .063 74dl’s. (18”)

kingOFgEEEks : Raisman 16" (60 DL) 3/8 .050 chain
Misc. smalls or parts off of Stihl 261 or Husky 570 carcasses

PA Dan : 042 / 048 Recoil (Please help with shipping)

Red 97: Box o' 351/346 project

moparnut88 Pferd file handles - a couple sizes and multiple available

T.Roller : Free slap fight and maybe a Mac 797

MKinslow Husqvarna 570XP cylinder, light transfer.

XP_Slinger 3/8, .058ga, 20", 72DL, K095 Mount bar

Acornhill Poulan 4000 starter pulley

huskihl 028. PM by 4pm Sunday 12/10

RIDE-RED 350r: 16" 3/8 56DL Low Profile Oregon bar with chain. I believe it's A064 mount. It fits on my old Husqvarna 35

SOS Ridgerider: 5 bottles of Woodland Pro Synthetic Oil.

 

[Manofstihl661]

Poulan xx has been claimed and possibly the husky bar too. I know mine wasn’t listed but i figure might as well leave it off unless something gets turned down

 

[RIDE-RED 350r]

Re-posting to reflect correction in the bar mount code for my listing:




Jon1212 : NOS Windsor MRA 660A9 tips, these are for the smaller Windsor RSN bars.(3)
NOS Oregon D176 Echo bar. 16" 3/8 050
New Oregon Powermatch K095 16" 3/8 .058 60DL.

Sty57 : tank & top cover for a 450xt.

brandonstclair20: Husqvarna 445 cylinder with piston
Mcculloch power Mac 380 cylinder and piston
Husqvarna 44 cylinder
Smaller Mcculloch cart motor cylinder

Marshy: Iron Age steel toe boots (uninsulated) made in US of A, size 14, 3E.

Johnmn bar 20 inch 3003 mount .325 .063

Matt Ellerbee : crasftman 1.9 top handle (non runner)

Drptrch : three chains, .325 .063 74dl’s. (18”)

kingOFgEEEks : Raisman 16" (60 DL) 3/8 .050 chain
Misc. smalls or parts off of Stihl 261 or Husky 570 carcasses

PA Dan : 042 / 048 Recoil (Please help with shipping)

Red 97: Box o' 351/346 project

moparnut88 Pferd file handles - a couple sizes and multiple available

T.Roller : Free slap fight and maybe a Mac 797

MKinslow Husqvarna 570XP cylinder, light transfer.

XP_Slinger 3/8, .058ga, 20", 72DL, K095 Mount bar

Acornhill Poulan 4000 starter pulley

huskihl 028. PM by 4pm Sunday 12/10

RIDE-RED 350r: 16" 3/8 56DL Low Profile A064 mount with chain.

SOS Ridgerider: 5 bottles of Woodland Pro Synthetic Oil.

 

[Jon1212]

@RIDE-RED 350r I like your sig line.....but a better question would be "why do I only own 9 chainsaws?"