more jms

[tree monkey]

bit of a problem with this on as well

these pics were sent to me. he's going to need a cylinder for sure. 660

 

[Deets066]

bit of a problem with this on as well

these pics were sent to me. he's going to need a cylinder for sure. 660

That one must be a few years old, he hasn't used fingers for a while.

Was it scored?

 

[dall]

Did it take out the rings ? Doesn't look like has much of a area to hold them in place

 

[Moparmyway]

Looks like the transferrs and intake are one and the same

 

[Deets066]

Did it take out the rings ? Doesn't look like has much of a area to hold them in place

Probly ran the piston backwards, but your right. Not much there

 

[jake wells]

yeah i bet there is more problems than that.

 

[tree monkey]

was supposed to be a new piston when he bought it, this is 5 tanks later

 

[tree monkey]

he also said there are metal shavings in the case

 

[Moparmyway]

he also said there are metal shavings in the case

Lots of boogered pistons lately .....


5 tanks ????
Looks more like 5 years

 

[CapitaineHaddoc]

he also said there are metal shavings in the case

Seriously? He let metal chips in the case?

 

[Frank bierce]

bit of a problem with this on as well

these pics were sent to me. he's going to need a cylinder for sure. 660

Holy smokes. I'm not sure where the grinding stops, and the cylinder begins!! Is that a bunch of transfer at the base of the cylinder wall?

 

[tree monkey]

Seriously? He let metal chips in the case?

from what I've seen, its common with him.

i'm thinking he ports the intake and exhaust with the cylinder mounted to the case

 

[jake wells]

from what I've seen, its common with him.

i'm thinking he ports the intake and exhaust with the cylinder mounted to the case

Work like this gives respectable saw porters a bad name. He needs a long jail sentence with some fines tacked on to it for poor and shoddy workmanship.

 

[CapitaineHaddoc]

from what I've seen, its common with him.

i'm thinking he ports the intake and exhaust with the cylinder mounted to the case

Even for a newbie like me this sounds crazy.

 

[dall]

My piston you sent me back was wore
My saw was a running saw when I sent it to jms
Horizontal line all the way around the cylinder about 3/16
Also the dreaded sanded base

My findings of the jmssaw 066 piston and cylinder that was on my saw when I asked you to redo it

 

[drf256]

What's your plan to clean the cases on the saws he's done?

Of course, it's the recipients fault. Somehow.

 

[T.Roller]

bit of a problem with this on as well

these pics were sent to me. he's going to need a cylinder for sure. 660

Wow just wow

 

[BrokenSVT]

What's your plan to clean the cases on the saws he's done?

Of course, it's the recipients fault. Somehow.

For sure. They didn't follow his stringent post-JMS cleaning regimen...or something...

Wow just wow

That's what I was thinking. I feel bad for the owner, having been there.

I don't have a lot to contribute, but I'm due to pay a little forward. I'll pitch in a few bucks once the plan is hatched.

 

[Chainsaw Addict]

So it looks like the bullet I dodged was a big one not sending my 660 to him.

Sent from my SM-N900P using Tapatalk

 

[cus_deluxe]

Meh...looks like this saw owner got off easy....lol.