High Quality Chainsaw Bars Husqvarna Toys

Saw video thread

Frank bierce

Here For The Long Haul!
GoldMember
Local time
3:29 AM
User ID
193
Joined
Dec 24, 2015
Messages
4,534
Reaction score
17,427
Location
Oregon
Country flag
No more leaky seals or intake air leaks. I have a little bit more fine tuning and it'll be ready for some friendly competition.

076 with 60" bar, 8 pin .404 full comp, 32" wood..
That thing looks like it is throwing firewood pieces for chips. Lol
 

Chainsaw Jim

Con Artist LLC
Local time
3:29 AM
User ID
836
Joined
Feb 8, 2016
Messages
4,014
Reaction score
77
Location
Springfield Oregon
That thing looks like it is throwing firewood pieces for chips. Lol
This one really seemed like it. The chips were chunks about the size of a pencil eraser. It's running 9-pin 3/8 full comp 32" bar. It busted five rakers on the one cut. The chain was originally set up for much softer green hardwood and I should have not used it. I'm going to run it with .404 to see if it pulls it worth a crap.

 
Last edited:

Dub11

Saw R skeery
GoldMember
Local time
5:29 AM
User ID
2014
Joined
Oct 21, 2016
Messages
34,438
Reaction score
146,038
Location
Kansas
Country flag
This one really seemed like it. The chips were chunks about the size of a pencil eraser. It's running 3/8 9 pin full comp. It busted five rakers on the one cut. The chain was originally set up for much softer green hardwood and I should have not used it. I'm going to run it with .404 to see if it pulls it worth a crap.



Dam! That thing looks *f-wording pissed!
 

RI Chevy

Mastermind Approved!
Local time
6:29 AM
User ID
1254
Joined
May 7, 2016
Messages
27,002
Reaction score
67,739
Location
earth
Country flag
The 066/394 would probably go through green wood like a hot knife through butter. That thing really rips. [emoji106]
 

Dub11

Saw R skeery
GoldMember
Local time
5:29 AM
User ID
2014
Joined
Oct 21, 2016
Messages
34,438
Reaction score
146,038
Location
Kansas
Country flag
This one really seemed like it. The chips were chunks about the size of a pencil eraser. It's running 9-pin 3/8 full comp 32" bar. It busted five rakers on the one cut. The chain was originally set up for much softer green hardwood and I should have not used it. I'm going to run it with .404 to see if it pulls it worth a crap.

Build thread?
 

Mastermind

Chief Cat Herder
Staff member
GoldMember
Local time
5:29 AM
User ID
4
Joined
Dec 3, 2015
Messages
47,611
Reaction score
308,349
Location
Banner Springs Tennessee
Country flag
This one really seemed like it. The chips were chunks about the size of a pencil eraser. It's running 9-pin 3/8 full comp 32" bar. It busted five rakers on the one cut. The chain was originally set up for much softer green hardwood and I should have not used it. I'm going to run it with .404 to see if it pulls it worth a crap.


With the right chain..........that will be a handful.

Very nice Jim.
 
Top